SPOON RACING COMPUTER NA1 *DISCONTINUED*

From consideration fuel consumption, noise, exhaust gas, to aging, such as data such as ignition timing and air-fuel ratio of normal computer, has become a setting that gives satisfaction easy to get to everyone. The spoon, developed under a variety of conditions in order to meet higher output in the driving scene racing like more, the demand for high-response, to conduct the test, a safe total injection quantity of fuel, exhaust gas temperature, and ignition timing We are developing a computer while set in the area, to achieve high power. In addition, it would be a valley of torque inertia of the intake does not work is exposed mushroom type air cleaner box is required in the intake system at any STD even with a spoon made computer. On the other hand there is no problem if there is a flow rate ensure genuine equal to or greater than the exhaust system. However, please note, such as large-diameter pipe muffler can not expect an effect.

spoon RACING PLUG # 24 [6PCE]

Spoon Racing Plugs specifically selected for use in Honda engines for performance applications (also suitable for Street use). Superior spark and re-cooling ability

■Set of 6 Plugs

spoon OIL FILLER CAP

Extreme heat and engine vibration in Race Car can cause the OEM Plastic Cap to shake loose or even crack. Spoon Oil Filler Cap made from High-Grade Aluminium, Expands at the same rate as your (Aluminium) Valve Cover, also has special rubber seal designed to reduce vibration transfer and hold cap in place.

seeker ULTRA-LIGHT OIL FILLER CAP [RED / BLUE / BLACK / GOLD / SILVER]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight ~60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.

■ Includes Spoon Horn Button (not sold separately)
■ WEIGHT: ~60g 

AVAILABLE IN 5 COLOURS: ■Red ■Blue ■Black ■Gold ■Silver

spoon MAGNETIC DRAIN BOLT, ENGINE

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.

■ Engine Drain Bolt sold individually.

spoon MAGNETIC DRAIN BOLT, TRANSMISSION

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.

■ Transmission Drain Bolt sold individually.

spoon MAGNETIC DRAIN BOLT SET

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.

■ Set of Engine and Transmission Drain Bolts.

SPOON RESERVOIR TANK COVER SET [V2] [SOX] *NEW*

The last thing you want to do at the circuit is lose traction thanks to someone having dropped fluids on to the track surface, let alone drop your own fluids and contribute to the problem - Spoon Reservoir Covers slide over your Brake Fluid Reservoir and Clutch Fluid Reservoir (etc.) and are designed to catch any fluids that may be spilled under high lateral-G driving at the circuit. Also helps prevent damage to engine-bay paintwork from spillage of Fluids.

■ 25% Cotton 75% Polyester.
■ 1PCE.

SPOON 3-1 EXHAUST MANIFOLD [V2] NA1  *CONSULTATION ORDER*

■ High-Flow 3 into 1 design designed for maximum torque
■ Full Stainless Steel constuction
■ Special Order item only available via Consultation

■ Ultra-Lightweight Full Titanium constuction 
■ Special Order item only available via Consultation

SPOON ADJUSTABLE DAMPER, SPRING NA1 *DISCONTINUED*

SPOON BRAKE PEDAL BOX NA1, NA2, NA1 type R, NA2 type R

Based on New Genuine Honda Brake Pedal Assembly, Spoon strengthens, boxes and re-inforces the arms to prevent any flex or fatigue through extreme motorsport use. 

■ Dramatically improves the reliability of the brake control and promotes pedal stiffness.
■ Brake fluid air vent work will be required.

SPOON MONOCOQUE CALIPER SET NA1

Spoon Monocoque Caliper features extremely high rigidity through the high-strength integrated monocoque design and cast alloy process.
Utilizing S2000 sized pads, there is a huge range of pad selection and availability and the 4-Piston design extends pad-life through the promotion of even Piston-to-Pad pressure. 100% compatible with ABS System and rear brake distribution

■ Requires use of 300mm Brake Rotor with Maximum Rotor Thickness of 26mm.
■ SPOON MONOCOQUE CALIPER: 2.6Kg
■ S2000 STANDARD CALIPER: 4.7Kg
■ Piston size: 40.46φ + 36.12φ
■ Stock Pad Equivalent: 45022-AP1-000

PLEASE NOTE: When bleeding calipers, please do not over-tighten the bleed nipples – Specified Torque Value is 7.0Nm.

PLEASE NOTE: Caliper Clearance of various wheel combinations may require use of a Wheel Spacer – We recommend use of Spoon Extended Hub Bolts if you intend to run spacers. For Example: S2000 Genuine 16” (BBS) requires 15mm Wheel Spacer; CL7 Genuine Wheel required 5mm Wheel Spacer.

CALIPER REBUILD PARTS MONOCOQUE

Spoon Monocoque Calipers are designed for motorsport use and therefore have a full complimnet of spare and replacement parts available for pit-repairs or complete rebuild /overhaul.

SPOON MASTER CYLINDER STOPPER NA1 *DISCONTINUED*

Brake Master Cylinder Brace.

SPOON AERO MIRRORS NA1

■ FRP with Gel-Coat (minor preparation required before painting)
■ Features 'Hydro Blue' Wide View Mirror Lenses (replacment mirror glass available) 
■ Made-to-Order

NSX-R GT BUMPER, FRONT NA1, NA2, 92R, 02R *NEW RELEASE*

Spoon has reproduced their NSX-GT Aero Bumpers as seen on their legendary NSX-GT (Macau Race Car).

■ FRP Composite Material with Gel-Coat
■ NEW RELEASE (DEC2018)

NSX-R GT BUMPER, REAR NA1, NA2, 92R, 02R *NEW RELEASE*

Spoon has reproduced their NSX-GT Aero Bumpers as seen on their legendary NSX-GT (Macau Race Car).

■ FRP Composite Material with Gel-Coat
■ NEW RELEASE (DEC2018)

NSX-R GT SIDE-SCOOP NA1, NA2, 92R, 02R *SPECIAL ORDER*

Spoon has reproduced their NSX-GT Side-Scoops as seen on their legendary NSX-GT (Macau Race Car).

■ FRP Composite Material with Gel-Coat.
■ NEW RELEASE (DEC2018)

SPOON BLUE WIDE REAR VIEW MIRROR NA1, NA2, 92R, 02R

Spoon Mirrors install over the existing standard mirror featuring 14000R curvature for increased field of view with low-distortion - Basically the same field of view as a 'Broadway' mirror with just the small compact size of the standard mirror body.

■ Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.
■ Features Spoon Logo

SPOON SHIFT KNOB, ALUMINIUM [5MT] NA1

Spoon Alloy Shift Knob is the same countour as the Duracon however it is a little heavier at ~130g.

■ Includes 5MT Shift Patten Decal.
■ Includes Locking grub-screw and Allen wrench.
■ 10mm  / 1.5mm

SPOON SHIFT KNOB, DURACON [5MT] NA1

Spoon Duracon Shift Knob is made from a special Heat-Resistant Thermo-Plastic - perfect to resist heat-soak from the transmission and exhaust and heat from direct sunlight and Summer cabin temperatures. Lightweight design at just ~80g

■ Includes 5MT Shift Patten Decal.
■ Includes Locking grub-screw and Allen wrench.
■ 10mm  / 1.5mm

DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde. The Thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O) and carbon-carbon (-C-C- bond) comonomer groups are incorporated into its main chain. Therefore the copolymer has superior chemical and thermal stability, compared with acetal homopolymer. Acetal co-polymer is well-balanced in terms of mechanical, chemical and thermal properties, and its superior moldability allows it to be widely employed in various industrial fields.
Source: PolyPlastics

SEEKER HEAVY SHIFT KNOB 400g [5MT] NA1

Same shape and size as Honda genuine shift knob - spherical type.
It was it possible to reliably shift work as well as to achieve a very moist and shift feel from its weight. Further, in order to perform a shift operation using the weight of 400g, it is gentle to be characterized for the respective gears.
We were greatly improved wear resistance and oxidation resistance subjected to TiAlN (titanium aluminum nitride coating) process on the surface. Furthermore SEEKER logo and shift patterns (5MT) to the top part we laser etching. Distinctive color and texture with the TiAlN, and enjoy the feel of heavyweight Come. ■ stainless steel surface treatment: TiAlN (titanium aluminum nitride coating). Weight: about 400g 5MT dedicated Honda genuine nuts separately if ■ genuine knob of car not a nut fixed You will need.

SEEKER: 400g (Stainless Steel)
STOCK: ~140g (Aluminium)

SPOON STEERING WHEEL [340mm]

Spoon Steering Wheel is manufactured by Momo Italy utilising an unique rim contour and 340mmm diameter specifically designed for maximum grip under race conditions - especially suited for FF vehicles with extreme 'kick-back'. 

■ Covered in the highest quality Itallian leather with Red-stitching
■ Includes Spoon Horn Button (not sold separately)..

SEEKER RACING SPEC STEERING WHEEL [350mm]

It is Kodawari of the steering wheel in pursuit of the sport driving, including race, and the like. 
The high rigidity and a 6061 aluminum alloy 5t with excellent corrosion resistance using the base frame epidermis was arrogance luxury smooth leather. (Using a punching leather to 9 o'clock, 3 o'clock in order to improve the familiar). Grip has adopted a finger Gakari good shape a slightly thick as can be driving and disconnect the power.  Stitch of the portion of force is applied does not have a worry that leather may come off even if I use it for many years I have been put in a cross-shaped. 
In addition to place a well-balanced logo and the top mark and our slogan to several places body finished in a stylish design. 
"R-SPIRIT" horn button of the dedicated will be attached. ■ specification steering outer diameter: 325mm Frame: 6061 aluminum alloy 5t Stitch: Red color of the cross-stitch epidermis: Luxury Black smooth leather (partially use the punching leather) Embroidery: Top on the surface 6 o'clock SEEKER logo, at 12 o'clock mark, embroidery our slogan on the back 12 o'clockhorn: dedicated "R-SPIRIT" horn button included

SPOON CARBON BUCKET SEAT [V2] *NEW RELEASE*

Spoon Racing Carbon Bucket Seats are designed to hold the driver firmly into place in the perfect driving position. Ultra lightweight Carbon Fibre construction, weighing in at only 5.7Kg, this is the ultimate Racing Seat for your Honda. Designed to reduce driver-fatigue through long races. 

■ Revised design to meet new Japanese safety standards
■ Seat Back Cover sold separately 
■ Released April 2019

SPOON ALUMINIuM SIDE STAY [FOR SPOON CARBON BUCKET SEAT]

Spoon Seat Bracket for use with Spoon Carbon Bucket Seats (Side-Mount).

■ For use with Seeker / Bride or Recaro Rails without incorporated side stays
■ Some modification to Rails may be required depending on the vehicle
■ Includes Mounting hardware.

CARBON BUCKET SEAT BACK   [COVER] *NEW RELEASE*

Spoon Seat Back Cover can be used to prevent scratches on the back of the seat and helps to protect passengers in the rear seats.

■ Features embroidered Spoon Logo 
■ Durable Neoprene fabric 
■ Does not fit V1 SpoonCarbon Bucket Seats

SEEKER x BRIDE FULL BUCKET SEAT [FRP]

It is a full bucket seat of the collaboration model of the BRIDE boasts a high rigidity and excellent hold of. The underlying shell has adopted the VIOS3 with the most matches easily seat position as much as possible down easy structure in Japanese type (Low MAX).
Shoulder support is somewhat smallish because, wearing indoor space to narrow a S2000 is also available.
This collaboration model inherits the design of the predecessor full bucket seat that had gotten popular, adopt a skin fabric red and black two-tone specification.
The BRIDE sheet somewhat strong competition image by the headrest further subjected to a dedicated logo embroidery to add a bright red stitch performance is intact, we have succeeded in that to be transformed into optimal fashionable to street youth It was.
BRIDE-made seat back protector in this product (black) is standard equipment.
Seat rail (sold separately) is a vehicle inspection also safe because it becomes a security standard conform if you can use in combination with made BRIDE.
Please feel free to contact us so we will also sell BRIDE seat rail.

Note: If you are attached to the S2000 has a case where BOX lid portion that housed the trunk opening and closing the switch can not be to interfere with the fully open to the sheet. In each case there is no problem if it is possible to slide the seat forward.

■ Specifications
Shell: FRP Silver Shell (VIOS3-based)
Skin fabric: Black & Red logo dedicated logo and dedicated Red stitch Add
Sheet weight about 7.1kg (not including the seat rails)

SPOON METER ASSEMBLY NA1 *DISCONTINUED*

SPOON METER ASSEMBLY NA1 TYPE R *DISCONTINUED*

RIGID COLLAR SET [FRONT+REAR SET] NA1, NA2

■ Front and Rear Set
■ 28PCS