SPOON SPORTS OFFICIAL DEALER
Gaijin-Garage Homepage About Gaijin-Garage Frequently Asked Questions Contact Gaijin-Garage Place your Order

 

SEEKER OFFICIAL DEALER
 
POWER UNIT (SPOON) INTAKE / EXHAUST (SPOON) DRIVETRAIN (SPOON) CHASSIS / BODy REINFORCEMENT (SPOON)
SUSPENSION SYSTEM (SPOON) BRAKE SYSTEM (SPOON) AERO / BODY (SPOON) INTERIOR (SPOON)

■ CIVIC TYPE-R 'EURO' FN2 (2009-2011)


POWER-UNIT
■ POWER UNIT Top of Page

■ COMPLETE ENGINES


PART-NUMBER

SPOON ENGINE COMPLETE, K20A FN2

BORE x STROKE: XX.X mm × XX.Xmm (STOCK 86.0mm × 86.0mm)
COMPRESSION RATIO: 11.7
DISPLACEMENT: 1998cc
POWER: ~xxxPS@xxxx0RPM (STOCK 202PS@7800RPM)
TORQUE: ~xxxNm@xxxxRPM (STOCK 193Nm@6800RPM)
REV-LIMIT: x,xxxRPM (STOCK 8400RPM)
Specified engine oil: MOTUL 300V

Greatly imporved engine response / pickup through Spoon Balancing process.
Factory Tolerance 2.0g - Spoon Tolerance 0.02g.
Spoon Complete Engine based on Brand New Genuine Honda OEM Block and Head. All New Genuine Honda OEM Parts used in addition to:
- Spoon Head Gasket (+0.2:1 CR)
- Spoon Balanced Piston Set

Shipped in a Crate / Carton.

10000-FN2-C00 $13,262.60

■ ENGINE ACCESSORIES


PART-NUMBER

SPOON CARBON PLUG COVER [K20A] EP3, DC5

Ultra lightweight dry carbon ignition coil pack cover.

12231-K20-010 $137.15

PART-NUMBER

spoon OIL FILLER CAP

Extreme heat and engine vibration in Race Car can cause the OEM Plastic Cap to shake loose orSEEK even crack.
Spoon Oil Filler Cap made from High-Grade Aluminium, Expands at the same rate as your (Aluminium) Valve Cover, also has special rubber seal designed to reduce vibration transfer and hold cap in place.

ALL-15610-000 $73.58

PART-NUMBER

seeker ULTRA-LIGHT OIL FILLER CAP [RED / BLUE / BLACK / GOLD / SILVER]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight ~60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.
WEIGHT: ~60g
AVAILABLE IN 5 COLOURS: ■Red ■Blue ■Black ■Gold ■Silver

PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER

OIL-CAP-XXX $89.39

PART-NUMBER

SPOON YELLOW HEAD COVER [K20A] [FD2, FN2] FN2

Spoon Yellow Head Cover - Based on New Genuine Head Cover.
Includes Genuine Honda OEM Valve Cover Gasket Valve Cover Grommets and spark Plug Seals.

12310-FD2-000 $468.04

PART-NUMBER

SPOON RACING PLUG # 24 [4PCE] FN2

For Circuit or Street use, Spoon Racing Plugs are optimesed for performance Honda engines.
As the Combusion Chamber heat value increases, the plugs have a better ability to cool down faster. (NGK8 number is equivalent.)

98079-16B-G24-X4 $146.29

PART-NUMBER

SPOON RESERVOIR TANK COVER SET [SOX] *NEW*

The last thing you want to do at the circuit is lose traction thanks to someone having dropped fluids on to the track surface, let alone drop your own fluids and contribute to the problem - Spoon Reservoir Covers slide over your Brake Fluid Reservoir and Clutch Fluid Reservoir (etc.) and are designed to catch any fluids that may be spilled under high lateral-G driving at the circuit. Also helps prevent damage to engine-bay paintwork from spillage of Fluids.
25% Cotton 75% Polyester. 1PCE.

ORG-90000-020 $13.33

PART-NUMBER

SEEKER RESERVOIR TANK COVER SET [SOX]

Fire Retardant Material. It is a safe reservoir tank cover that was manufactured in the flame-retardant material. Brake and clutch, and by using covered the reservoir tank of power steering fluid, to keep the quickly absorbed engine room boiling over of fluid to clean. The color is also the identity of the SEEKER "SEEKER orange".

PART-NUMBER

SEEK-RES-COV $16.83

■ BAFFLED OIL PANS


PART-NUMBER

SPOON BAFFLE OIL PAN [K20A] FN2

Essential upgrade for ANY Circuit Use! Under high lateral G-force, through long sweeping corners at sustained high RPM, the Baffled Oil Pan helps prevent oil-starvation leading to catastrophic engine failure!
Spoon Baffled Oil Pan is based on a Brand New Genuine Honda OEM JDM Oil Pan with specially designed and manufactured Spoon Baffle Plates welded into place, re-powdercoated (on painted models) with Spoon Serial Number Plaque.
Includes Genuine Honda OEM Oil Pan Gasket (on models so required) and New Hamp Oil Filter.
Oil level sensor is attached to FN2, please transplant into the Spoon Oil Pan when installing - Oil Sensor Gasket included.. 

11200-FN2-001 $533.35

PART-NUMBER

SPOON HEAT BARRIER TAPE

Oil Viscosity decreases when subjected to constant high temperatures during performance driving. The Exhaust Manifold on B-series engines routes beneath the Oil Pan in very close proximity – this can lead to extreme heat transfer from the exhaust manifold. This is evident when you remove an old Oil Pan and inspect the shallow end of the pan where the exhaust manifold is closest – you will see baked on oil residue on the inside of the pan and this is clear evidence of high heat transfer from the exhaust. Spoon Heat Barrier Tape provides a thermal barrier in between the Exhaust Manifold and the Oil Pan. We recommend application of the Heat Barrier Tape to new Spoon Baffled Oil Pans as the fresh clean surface will provide excellent adhesion when the Oil Pan is new – plus installation Is very easy when the Oil Pan is off the engine. The Heat Barrier Tape can be used on other models and components where you would want to prevent heat transfer from various components into the fluid systems etc. For example Master Brake Cylinder (and Lines), Master Clutch Cylinder (and Lines) Brake Lines, S2000 Heat Shield… In fact, the Spoon S2000 Super Taikyu Race Car uses the heat shield over the entire Firewall through to the whole length of the Transmission Tunnel etc.
Size: 200mm x 300mm 

PART-NUMBER

ALL-11200-000 $22.64

PART-NUMBER

SPOON MAGNETIC DRAIN BOLT, ENGINE

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Engine Drain Bolt sold individually.

ALL-90009-001 $21.16

PART-NUMBER

SPOON MAGNETIC DRAIN BOLT SET [ENGINE + TRANSMISSION]

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Set of Engine and Transmission Drain Bolts.

ALL-90009-000 $39.97

■ ENGINE COMPONENTS


PART-NUMBER

SPOON 2P HEAD GASKET [K20A] FD2, CL7

Weld-Type 2-Ply Head Gasket, super-strong bond design, improves torque through increased Compression.Ratio 0.2:1.
SPOON 0.45mm(STANDARD 0.75mm)
http://www.spoonsports.jp/philosophy04.html

12251-FD2-G01 $130.62

PART-NUMBER

SPOON PISTON, PISTON RING SET [OS] [K20A] FD2

This kit has been in four sets and piston ring of 0.25mm over bore size for mass production. Weight of the piston within 1g, ring is located by aligning 0.07mm within the intersection of the abutment.

13030-FD2-010 $602.85

PART-NUMBER

SPOON HIGH CAMSHAFT [IINTAKE] FN2

Spoon High-Lift Camshafts are designed for optimum engine response and maximised torque - Perfect for Circuit or Road Race applications with peak gains in midrange through to high RPM.

HONDA Primary: 32.62/32.43 Secondary: 32.44/32.26 Mid: 35.53/34.66 Action Angle: 243/240 Max Lift: 11.60/10.35
SPOON Primary: 32.71/32.54 Secondary: 32.49/32.33 Mid: 35.88/34.94 Action Angle: 253/250 Max Lift: 12.40/10.80

14111-K20-G00 $566.00

PART-NUMBER

SPOON HIGH CAMSHAFT[EXHAUST] FN2

Spoon High-Lift Camshafts are designed for optimum engine response and maximised torque - Perfect for Circuit or Road Race applications with peak gains in midrange through to high RPM.

HONDA Primary: 32.62/32.43 Secondary: 32.44/32.26 Mid: 35.53/34.66 Action Angle: 243/240 Max Lift: 11.60/10.35
SPOON Primary: 32.71/32.54 Secondary: 32.49/32.33 Mid: 35.88/34.94 Action Angle: 253/250 Max Lift: 12.40/10.80

14121-K20-G00 $566.00

■ COOLING SYSTEM


PART-NUMBER

SPOON RADIATOR CAP [TYPE-D] FN2

To raise the pressure of the cooling system raises the boiling point of the coolant. Spoon Radiator Caps raise the pressure to increase the efficiency of the cooling system. For the Complete Spoon Cooling System, we recomend using the Radiator Cap in combination withthe Spoon Thermo Switch, Spoon Thermostat and Spoon SEP Radiator Hoses. Please check with us for the correct type of Cap for use on your Vehicle - Type-D Caps suit newer Honda Radiators such as EG6/EG9/EG2/EK4/EK9/DC2/AP1/CL9 etc. Not suitable for use on Aftermarket radiators (please use Type-F).
SPOON: 1.35kgf/cm2
HONDA: 1.1kgf/cm2

PART-NUMBER

   

PART-NUMBER

SPOON RADIATOR CAP [TYPE-F] AFTERMARKET RADIATORS

To raise the pressure of the cooling system raises the boiling point of the coolant. Spoon Radiator Caps raise the pressure to increase the efficiency of the cooling system. For the Complete Spoon Cooling System, we recomend using the Radiator Cap in combination withthe Spoon Thermo Switch, Spoon Thermostat and Spoon SEP Radiator Hoses. Please check with us for the correct type of Cap for use on your Vehicle - Type-F Caps suit older Honda Radiators such as EF9/EF8/DA9 etc. Also suitable for use on most aftermarket radiators such as Spoon, Koyo, Mishimoto etc.
SPOON: 1.35kgf/cm2
HONDA: 1.1kgf/cm2

PART-NUMBER

ALL-19045-001 $30.56

PART-NUMBER

SEEKER RADIATOR CAP [TYPE-D] FN2

It is a high-pressure radiator cap to increase the pulling cooling efficiency boiling point of the coolant by increasing the pressure in the radiator.
This is quite useful at the time of high rotation traveling.
※ opening temperature: 1.3kgf / cm2 (normal 1.1)
1.3Kgf/cm2

PART-NUMBER

SEEK-RAD-TYPD $35.49

PART-NUMBER

SEEKER RADIATOR CAP [TYPE-F]

It is a high-pressure radiator cap to increase the pulling cooling efficiency boiling point of the coolant by increasing the pressure in the radiator.
This is quite useful at the time of high rotation traveling.
※ opening temperature: 1.3kgf / cm2 (normal 1.1)
1.3Kgf/cm2

PART-NUMBER

SEEK-RAD-TYPF $35.49

PART-NUMBER

SPOON THERMOSTAT [K20A] FN2

Spoon Thermostat lowers the actuation point by ~10℃ over the OEM thermostat to resist heat exchange. Sub-zero / Extreme Winter conditions may require block-plate on Radiator to reach operating temperature.
OEM Thermostat opens at 78 ℃ fully open 90 ℃
SPOON Thermostat opens at 68 ℃ fully open 78 ℃

19301-FD2-000 $82.72

■ RACING COMPUTER / ECU


PART-NUMBER

SPOON RACING COMPUTER [NTS EXCHANGE SERVICE] FN2

From consideration fuel consumption, noise, exhaust gas, to aging, such as data such as ignition timing and air-fuel ratio of normal computer, has become a setting that gives satisfaction easy to get to everyone. The spoon, developed under a variety of conditions in order to meet higher output in the driving scene racing like more, the demand for high-response, to conduct the test, a safe total injection quantity of fuel, exhaust gas temperature, and ignition timing We are developing a computer while set in the area, to achieve high power. In addition, it would be a valley of torque inertia of the intake does not work is exposed mushroom type air cleaner box is required in the intake system at any STD even with a spoon made computer. On the other hand there is no problem if there is a flow rate ensure genuine equal to or greater than the exhaust system. However, please note, such as large-diameter pipe muffler can not expect an effect. We will respond to individual requests if you use in motor sports vehicles and on subjected to high-level tuning. Please contact motorsport Gr.

37820-FN2-001 $870.78

PART-NUMBER

SEEKER LIGHTWEIGHT PULLEY [4-PCE] RED FD2

FD2 is a lightweight pulley 4-point SET for Civic R. High precision we realize the 1078g and significantly lighter against genuine total weight 2890g while of course ensuring the strength and durability more than enough. A rotating object weight by 1812g lighter, won the sharp racing acceleration, such as piercing and direct engine response. Also taking into account the character of the car that FD2 Civic R, pulley system is not everyday use is also no problem at all on the street so was equivalent to the original ratio. Belt You can use it as it is currently installed. The color you can choose from three types of red, blue, and orange anodized finish. FD2 Civic R exclusive goods crank pulley 486g (1911g) power steering pump pulley 281g (435g) idler pulley 185g (250g) alternator pulley 126g (294g) a total of 1078g (2890g) --- 1812g lightweight genuine equivalent to the ※ set the idler pulley of bearings are press fit. The bearings there is life because it will give me a regular inspection. (The life of the bearing is equivalent to the genuine product) it is also heard sold separately of the idler pulley as repair parts.

SEEK-PULLR-4PT

$1,051.72


PART-NUMBER

SEEKER LIGHTWEIGHT PULLEY [4-PCE] BLUE FD2

FD2 is a lightweight pulley 4-point SET for Civic R. High precision we realize the 1078g and significantly lighter against genuine total weight 2890g while of course ensuring the strength and durability more than enough. A rotating object weight by 1812g lighter, won the sharp racing acceleration, such as piercing and direct engine response. Also taking into account the character of the car that FD2 Civic R, pulley system is not everyday use is also no problem at all on the street so was equivalent to the original ratio. Belt You can use it as it is currently installed. The color you can choose from three types of red, blue, and orange anodized finish. FD2 Civic R exclusive goods crank pulley 486g (1911g) power steering pump pulley 281g (435g) idler pulley 185g (250g) alternator pulley 126g (294g) a total of 1078g (2890g) --- 1812g lightweight genuine equivalent to the ※ set the idler pulley of bearings are press fit. The bearings there is life because it will give me a regular inspection. (The life of the bearing is equivalent to the genuine product) it is also heard sold separately of the idler pulley as repair parts.

SEEK-PULLB-4PT

$1,051.72


PART-NUMBER

SEEKER LIGHTWEIGHT PULLEY [4-PCE] ORANGE FD2

FD2 is a lightweight pulley 4-point SET for Civic R. High precision we realize the 1078g and significantly lighter against genuine total weight 2890g while of course ensuring the strength and durability more than enough. A rotating object weight by 1812g lighter, won the sharp racing acceleration, such as piercing and direct engine response. Also taking into account the character of the car that FD2 Civic R, pulley system is not everyday use is also no problem at all on the street so was equivalent to the original ratio. Belt You can use it as it is currently installed. The color you can choose from three types of red, blue, and orange anodized finish. FD2 Civic R exclusive goods crank pulley 486g (1911g) power steering pump pulley 281g (435g) idler pulley 185g (250g) alternator pulley 126g (294g) a total of 1078g (2890g) --- 1812g lightweight genuine equivalent to the ※ set the idler pulley of bearings are press fit. The bearings there is life because it will give me a regular inspection. (The life of the bearing is equivalent to the genuine product) it is also heard sold separately of the idler pulley as repair parts.

SEEK-PULLO-4PT

$1,051.72


PART-NUMBER

SEEKER LIGHTWEIGHT PULLEY [3-PCE] FD2

FD2 is a lightweight pulley 3-point SET for Civic R. High precision we realize the 1143g and significantly lighter against genuine total weight 2890g while of course ensuring the strength and durability more than enough. A rotating object weight by 1747g lighter, won the sharp racing acceleration, such as piercing and direct engine response. Also taking into account the character of the car that FD2 Civic R, pulley system is not everyday use is also no problem at all on the street so was equivalent to the original ratio. Belt You can use it as it is currently installed. Slightly by eliminating the bearing press-fit of the idler pulley that comes with the 4-point SET weight will increase but was set to reasonable prices. The color you can choose from three types of red, blue, and orange anodized finish. FD2 Civic R exclusive goods crank pulley 486g (1911g) power steering pump pulley 281g (435g) alternator pulley 126g (294g) a total of 893g (2640g) --- 1747g lightweight

SEEK-PULLX-3PT $880.75

INTAKE-EXHAUST
■ INTAKE / eXHAUST SYSTEM Top of Page

■ INTAKE SYSTEM


PART-NUMBER

SPOON VENTULI BIG THROTTLE BODY [K20A] FN2

Based on Brand New Gebuine Honda OEM JDM Throttle Body Assembly.
To maximise N/A Engine Power you must maximise the airflow into the intake chamber.
Spoon Venturi Big Throttle Body designed for optimal air flow and velocity utilizing the Stock Throttle body Casting. Diamond-Cut machining process with mirror-finish polished surface. Venturi effect funnel and large-diameter butterfly with eliptical cross-setion butterfly.
BUTTERFLY DIAMETER SPOON 65mm (STOCK 62mm)
OUTER DIAMETER SPOON 70mm (STOCK 67mm)
TB Gasket included on models so equipped.
FD2 requires not machine port-matchiing on the Intake Manifold Inlet.
FN2 will have 2mm step down using the RSP Intake Manifold - MAchining required or may be performed in-house by Spoon (NTS Service) 17100-FN2-021.

16400-FD2-020 $1,044.93

PART-NUMBER

SPOON VENTULI BIG THROTTLE BODY [NTS EXCHANGE SErvice] FN2

[NTS] Exchange Service - Ship your ECU to Spoon Japan for work to be performed.
To maximise N/A Engine Power you must maximise the airflow into the intake chamber.
Spoon Venturi Big Throttle Body designed for optimal air flow and velocity utilizing the Stock Throttle body Casting. Diamond-Cut machining process with mirror-finish polished surface. Venturi effect funnel and large-diameter butterfly with eliptical cross-setion butterfly.
BUTTERFLY DIAMETER SPOON 65mm (STOCK 62mm)
OUTER DIAMETER SPOON 70mm (STOCK 67mm)
TB Gasket included on models so equipped.
FD2 requires not machine port-matchiing on the Intake Manifold Inlet.
FN2 will have 2mm step down using the RSP Intake Manifold - MAchining required or may be performed in-house by Spoon (NTS Service) 17100-FN2-021.

16400-FD2-021 $601.34

PART-NUMBER

SPOON INTAKE MANIFOLD [NTS EXCHANGE SERVICE] FN2

[NTS] Exchange Service - Ship your Intake Manifold to Spoon Japan for work to be performed.
For use of 70mm Throttle Body on FN2 Intake Manifold (RSP) there is a step of about 2mm occurs between the intake manifold and throttle Body. Spoon will Port-Match the Intake Manifold inlet to the 70mm Throttle Body outlet

17100-FN2-021 $379.79

PART-NUMBER

SEEKER AIR DUCT FN2

FN2 is the Civic TYPE-R EURO dedicated air duct. By directly incorporate air design from the front bumper opening it is possible to inhale the closer to the outside air fresh air as possible. Benefits to the engine power by lowering the intake air temperature is one of the big most important part. Also outside air inlet port provided on the front bumper opening (image yellow dotted line) should be placed upward as much as possible while providing the necessary more than enough open area, from the ground surface in the case of the normal vehicle height to duct opening bottom more than 25cm secured. The risk of street youth we have significantly reduced. Please then by all means get the strongest of the air duct to maximize the FN2 Civic engine power. FN2 Civic R EURO exclusive goods product contents air duct dedicated stay-bolt 1 Remove the parts of the resonator of genuine duct, relocation of genuine horn, incision fitted with a part of the genuine lower panel. ※ made ​​of FRP (black gel not yet painting goods)

PART-NUMBER PART-NUMBER

SEEK-FN2-AIR $276.05

PART-NUMBER

SEEKER AIR INTAKE KIT FD2

It is the SET of the air duct air cleaner BOX · air filter. Genuine of the air duct is located at the rear of the brake duct, it will also be forced to inhale the air warmed hit the radiator, etc. during running. In contrast SEEKER air duct is possible to inhale the fresh air close to the air as much as possible by the design to incorporate the air directly from the front bumper opening. Benefits to the engine power by lowering the intake temperature is one of the big most important part. This in addition to the air cleaner greatly capacity the upper part of the capacity of BOX UP. Significantly improves the intake efficiency by combining a high-efficiency air filter. In addition, we ensure the air-tightness of genuine equal level by incorporating a technique costly while made of FRP also give full consideration to the sealing of the air cleaner BOX. Please then by all means get the strongest air cleaner KIT to maximize the FD2 Civic engine power.

Air cleaner BOX
Replace the BOX top surface portion and the genuine products. (Lower part using genuine)
The FRP
Championship white-painted (TYPE-R other color paint is also available)
※ portion hit the clip to secure genuine clip is scratched in some painted surfaces. please note that.

Air duct
Remove the one part and the resonator of genuine duct, incision fitted with a part of the genuine brake duct.
※ This by the brake cooling performance is not a problem on internal testing.
Made of FRP (black gel not yet painting goods) * stays are made of steel

Please note: Our air duct is ordered and the layout of the performance-oriented. There is no problem running of the rainy weather, but the running of the flooding conditions, such as a large amount of water entering from the duct opening Please do not absolutely. Is dangerous lead to engine damage serious trouble.

Air filter
Cotton is a high-efficiency air filter of the wet.

PART-NUMBER PART-NUMBER PART-NUMBER

SEK-INT-FD2 $709.85

■ EXHAUST SYSTEM


PART-NUMBER

SPOON N1 MUFFLER KIT [CAT-BACK] FN2

The design and development of the muffler, consider a combination of each condition, the exhaust flow rate by utilizing the characteristics of those hot tends to mute, to have large muting the exhaust pipe near the engine, is placed in the body around the silencer I decided to to achieve concentration of mass. Rear silencer becomes one out one side in a small lightweight, reducing the overhang weight, good maneuverability also was able to achieve in the reduction of yaw the result. While originally required performance to increase the engine filling efficiency, increase the power performance of course, is balancing on the car the entire exercise performance. We have developed a combination of methods, materials, and repeat the test, the best muffler was completed. Exhaust sound with that noise of Honda, I sounded Kaion of V-TEC engine only in the high speed range.    Racing products. I can not attach it sub silencer.
N1 Silencer can not be used on this system.

PART-NUMBER

18000-FN2-000 $1,306.17

PART-NUMBER

SEEKER SUPREME EXHAUST SYSTEM [TAIL SILENCER] FN2

Supreme of the exhaust as the name is now complete. The pursuit of high-range sound with a dry, yet the volume of the safety standards, you can enjoy the pleasure to spur on the TYPE-R also in the practical range of such city riding to the full extent. Moreover, achieving a sense of power in the high rotation region without sacrificing the low and medium speed region by optimizing the internal structure of the main pipe diameter and silencer. In addition the joint portion between the intermediate pipe also sufficient consideration to the durability By a genuine same spherical flange, it was to prevent likely to occur cracks or the like by vibration. Processing of the body and the bumper does not require any at the time of mounting. SEEKER simultaneous mounting of an intermediate pipe (sold separately) is the best from the performance and sound quality, but you can use it in combination with the genuine intermediate pipe.
60mm Pipe, 50mm Tip

PART-NUMBER

SES-FN2-TAIL $1,117.36

PART-NUMBER

SEEKER SUPREME EXHAUST SYSTEM [B-PIPE] FN2

To deliver maximum performance to be used in conjunction with tail silencer.
The silencer of the dedicated size costly dare to pursue the adoption and performance and sound quality.
The joint portion between the intermediate pipe also give full consideration to the durability By a genuine same spherical flange, it was to prevent the resulting easy to crack or the like by vibration. The combination of a genuine tail silencer is also possible, but we recommend the simultaneous mounting of the best SEEKER tail silencer in performance and sound quality surface (sold separately). There is no "pipe stop of" is so we have included a dedicated flexible gasket corresponding to the main pipe diameter is enlarged at the time of the Company made ​​tail silencer used in conjunction with this product.

SES-FN2-BPIPE $880.75

DRIVETRAIN
■ DRIVETRAIN Top of Page

■ TRANSMISSION


PART-NUMBER

SPOON TRANSMISSION OVERHAUL [NTS EXCHANGE SERVICE] FD2

In a sense, it is difficult than the engine, the difference is easy to get to the life and shift feeling by hand feeling of kumite, but one person consistently mechanic of many years transmission dedicated decomposition the Company, washing, measuring, and reassembled I'm going is. The shift feel is smooth, from sense to put the gear, you will feel the transmission is going into nature. To motor sports Gr, please feel free to contact us consultation such as changing the gear ratio

20000-FD2-901 $2,893.66

PART-NUMBER

SPOON MAGNETIC DRAIN BOLT, TRANSMISSION

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Transmission Drain Bolt sold individually.

ALL-90009-002 $21.16

PART-NUMBER

SPOON MAGNETIC DRAIN BOLT SET [ENGINE + TRANSMISSION]

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Set of Engine and Transmission Drain Bolts.

ALL-90009-000 $39.97

■ CLUTCH / FLYWHEEL


PART-NUMBER

SEEKER LIGHT-WEIGHT FLYWHEEL [K20A] 3.8KG FN2

Result of extensive contemplation for balance of city riding and sports cars, we set the individual weight to the optimum 3.8kg. Very lightweight but high-strength, and I have been subjected to a dynamic balance, and promises a sharp racing from low rotation to high rotation. ※ genuine clutch system compliant products (please prepare a genuine pilot Bush during installation)

SEEK-FLY-K20 $654.64

PART-NUMBER

SPOON CLUTCH DISK [NON-ASBESTOS] FN2

Disc-Type Clutch for Street and sports Use. Rated for 500HP+
Can be used with Stock Clutch Cover. K20A

22200-DC5-001 $315.66

PART-NUMBER

SPOON CLUTCH DISK [METAL] FN2

Puck-Type Clutch for Race Use - Not recommended for Street Use. Rated for 500HP+
Can be used with Stock Clutch Cover. K20A

22200-DC5-000 $380.96

PART-NUMBER

SPOON CLUTCH COVER [PRESSURE PLATE] FN2

30% Higher crimp force without any increased pedal effort - Smooth operation and increased longevity. Resistant to judder sensation. K20A

22300-DC5-001 $413.62

PART-NUMBER

SPOON RELEASE BEARING [SPOON] FN2

Spoon Release Bearings are hand-modified for reduced friction to ensure maximum performance and reliability under Race Conditions. K20A

22810-DC5-G00 $152.39

PART-NUMBER

SPOON CLUTCH SLAVE HOSE FD2

Standard hydraullic lines use Rubber hose which is prone to flexing, ballooning and even splitting. Spoon Clutch Slave Hose uses high-strength Stainless Steel Braided Hose that has also been internally Teflon Coated resulting in reliable clutch operation.

46961-FD2-000 $97.96

■ GEARSETS


PART-NUMBER

SPOON CROSS GEAR SET FD2, CL7

SPOON 4th: 1.212 5th: 1.027 6th: 0.921
HONDA 4th: 1.147 5th: 0.921 6th: 0.738

23000-FD2-100 $1,523.86

■ LIMITED SLIP DIFFERENTIAL


PART-NUMBER

SPOON LSD KIT FN2

SPOON 1.5 Way Mechanical LSD for Competition Use.
Fully Servicable With Clutch Pack Set and Complete LSD Overhaul Sets available separately.
Initial torque setting set to 9 ~ 9.5kg (cold). Mechanical L. S. D. Structure, may the sound of the internal gear and sound dragging of the drive wheels, sound vibration occurs.
Genuine Honda OEM Side Bearing Included.

41000-DC5-000 $1,066.70

PART-NUMBER

SPOON LSD CLUTCH PLATE SET FN2

LSD Clutch Plates are a consumable part, designed to wear over time. Replace yours with the Replacment Clutch Plate Set.

41000-DC5-S00 $84.90

PART-NUMBER

SPOON LSD OVERHAUL SET FN2

LSD Complete Overhaul Set - No need to replace your worn LSD - Rebuild it !

41000-DC5-S01 $348.31

PART-NUMBER

SPOON FINAL GEAR SET 5.3 FN2

5.333 FD. By replacing the final gear, it is valid, such as circuit racing can low gear of the final drive ratio.

41220-FD2-101 $522.47

PART-NUMBER

SEEKER HYPER GEAR ADVANCE, OIL [75W90] 1L

HYPER GEAR ADVANCE is a 100% chemical synthesis and the next generation oil embodying the mission oil to the ideal of SEEKER. Previously from HONDA sports car can be recommended finally with confidence repeat the development and testing on the target gear oil is we finished. Exchanges in the oil manufacturers and densely SEEKER reliable as background, has led to the completion by the "test-and-error" that repeats the harsh test of under all conditions. Because the original oil by our company which is specialized to HONDA cars we are proud to be the result obtained form what. If it is possible once the trial will be surprised to smooth shift feel from the cold up to the time of high temperature and high load.
■ HYPER GEAR features of ADVANCE very good
■ low-temperature fluidity, smooth shift feel realized from the cold shift feel the change even in high temperature and high load in
■ circuit driving, etc. will surely protect the gear at minimum.
■ easy-to-use 1L bottle.
■ genuine def we will of course respond to a mechanical LSD. ※ In the case of carbon LSD, etc. equipped car, please check with the manufacturer.
■ You can use it in any MT vehicles regardless of the drive system.
SPEC ■ 100 Pasento SYNTHETIC SAE 75W-90 API GL-5 1L bottle.

HYPER-GEAR-7590 $46.01

PART-NUMBER

SPOON DRIVE SHAFT SET FD2

Spoon Driveshafts are developed to have minimal frictional values to increase reliability of hte joints and shaft through endurance racing. With paired and balanced shafts and hand-polished joints to a mirror-finish, the result is greatly reduce surface fatique.
Based on NEW Genuine Honda Driveshafts.

42300-FD2-C00 $2,109.96

PART-NUMBER

SUPER SHIFT COLLAR FN2

Genuine change lever ASSY is secured by a floating structure that is by inserting a metallic color to the rubber bushing.
Our SSC has realized a direct shift feel beyond recognition while suppressing as much as possible that the unpleasant vibration to a structure in which sandwich the two-piece color of urethane material that is some of the flexibility to the metal from the top and bottom of the change lever ASSY .
Will enable better shift operation by receive your in conjunction with the Olympus Heavy shift knob (Heavy shift knob).
■ point of this product to the made ​​of a metal such as aluminum is possible that as much as possible reduce the unpleasant vibration by adopting a urethane material. We have also realized the shift feel a more solid feeling to be fixed "while crushing slightly" to use some of the flexibility of urethane color from the top and bottom

PART-NUMBER PART-NUMBER

SEEK-SSC-FN2 $47.32

CHASSIS / BODY REINFORCEMENT
■ BODY REINFORCEMENT Top of Page

PART-NUMBER

SPOON CROSS BEAM BAR FN2 *DISCONTINUED*

Chassis rigidity is very high, the rigidity of the sub-frame body made the cornerstone of such suspension is missing. Without incomprehensible move is a no quality ride, to reinforce the sub-frame body in order to further increase the high kinetic performance, we have developed a bar to reinforce the truss structure reinforcement the opening of the front and back.

50250-FN2-000 $304.77

PART-NUMBER

SPOON MOTOR RIB FN2

PART-NUMBER

60500-FN2-000 $631.31

SUSPENSION
■ SUSPENSION SYSTEM Top of Page

■ Springs / DAMPERS / COILOVERS


PART-NUMBER

SEEKER LOWDOWN SPRING FN2

Car sales we have achieved a reasonable low form and high handling and before and after both genuine ratio of about 20mm down, spring rate is set of genuine ratio of about 20% up. It will be the use of replacement with genuine spring. FN2 Civic TYPE-R EURO exclusive goods vehicle height: original ratio of about 20mm down spring rate: original ratio of about Pasento UP 20 ※ all internal measurement value is less than 250mm lower edge height of ※ This product fog lamp by mounting (front fog lamp) will be the vehicle inspection fit in the mounting of our company made ​​fog lamp cover of removal or optional fog lamp in regard vehicle to be. (Minimum ground clearance is 90mm necessary) might be ※ some of the spring sound out of the property on the front spring of the product. (In particular, stopping when the handle laid-in-law, etc.) Please notePART-NUMBER PART-NUMBER

SEEK-SPRING-FN2 $525.82

■ RIGID COLLAR™ リジカラ


PART-NUMBER

RIGID COLLAR [FRONT] FN2

8 PCE

50261-FN2-000 $211.60

PART-NUMBER

RIGID COLLAR [REAR] FN2

2 PCE

50300-GE8-000 $65.83

BRAKE SYSTEM
■ BRAKE SYSTEM Top of Page

PART-NUMBER

SPOON MONOCOQUE CALIPER SET FN2

Spoon Monocoque Caliper features extremely high rigidity through the high-strength integrated monocoque design and cast alloy process.
Utilizing S2000 sized pads, there is a huge range of pad selection and availability and the 4-Piston design extends pad-life through the promotion of even Piston-to-Pad pressure. 100% compatible with ABS System and rear brake distribution.
Requires use of 300mm Brake Rotor with Maximum Rotor Thickness of 26mm.
SPOON MONOCOQUE CALIPER: 2.6Kg
S2000 STANDARD CALIPER: 4.7Kg
Piston size: 40.46φ + 36.12φ
Stock Pad Equivalent: 45022-AP1-000

PLEASE NOTE: When bleeding calipers, please do not over-tighten the bleed nipples – Specified Torque Value is 7.0Nm.
PLEASE NOTE: Caliper Clearance of various wheel combinations may require use of a Wheel Spacer – We recommend use of Spoon Extended Hub Bolts if you intend to run spacers. For Example: S2000 Genuine 16” (BBS) requires 15mm Wheel Spacer; CL7 Genuine Wheel required 5mm Wheel Spacer.

45020-MBF-G01 $1,393.24

CALIPER REBUILD KITS Please clickHERE to view individual components


PART-NUMBER

CALIPER REBUILD PARTS MONOCOQUE

Spoon Monocoque Calipers are designed for motorsport use and therefore have a full complimnet of spare and replacement parts available for pit-repairs or complete rebuild /overhaul.

   

PART-NUMBER

SPOON LONG HUB BOLT [EACH]

The standard Hub Bolts will only allow for use of a 5mm spacer maximum. Spoon Long Hub Bolts are +8mm longer than standard hub bolts to allow use of Wheel Spacers without compromise of the length of the thread the Wheel Nut has to bite. Recommended for use when installing Spoon Brake Calipers to enable use of Wheel Spacers to promote Caliper to Spoke clearance of Wheels.
Hub Bolt, Each.
SPOON: 52mm
HONDA: 44mm

90113-EK9-000 $8.71

PART-NUMBER

SPOON LONG HUB BOLT [SET, 20]

The standard Hub Bolts will only allow for use of a 5mm spacer maximum. Spoon Long Hub Bolts are +8mm longer than standard hub bolts to allow use of Wheel Spacers without compromise of the length of the thread the Wheel Nut has to bite. Recommended for use when installing Spoon Brake Calipers to enable use of Wheel Spacers to promote Caliper to Spoke clearance of Wheels.
Hub Bolt, Set of 20.
SPOON: 52mm
HONDA: 44mm

90113-EK9-000 $174.16

PART-NUMBER

SEEKER WIDE TREAD SPACER [5mm] FN2

5mm Spacer 2PCE. 4x114 / 5x114. Aluminum is a die-cast of 5mm thickness wide tread spacer.
It was to minimize the camera shake by setting a high degree of accuracy and high strength and Honda vehicles only size the hub diameter (except one part of the model).
It will be the hub diameter 64m P.C.D 114.3 4 hole / 5 hole multi-type two 1SET.

SEEK-SPACER-5MM $50.32

■ BRAKE ROTORS


PART-NUMBER

SEEKER HIGH-CARBON ROTOR, SLOTTED [FRONT] FN2

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.
Features slotted design for performance use.

Pricing is for a pair of Rotors (RHS + LHS).

SEEK-ROTOR-EP3S $460.09

PART-NUMBER

SEEKER HIGH-CARBON ROTOR [FRONT] FN2

Seeker high-carbon rotors have 20% increase in carbon content over standard rotors with significantly inclreased bite of the pads.

Pricing is for a pair of Rotors (RHS + LHS).

SEEK-ROTOR-EP3 $354.93

■ BRAKE PADS


PART-NUMBER

SPOON BRAKE PAD [FRONT] FN2

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

45022-AP1-000 $239.46

PART-NUMBER

SPOON BRAKE PAD [FRONT] FN2 *DISCONTINUED*

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type
*Superseeded by 45022-AP1-000

45022-FN2-000 $239.46

PART-NUMBER

SPOON BRAKE PAD [REAR] FN2

Spoon Brake Pads are designed for performance use with improved pad-wear (and Rotor wear) at the Circuit and resistance to Fade under high-temperature use.
Recommended for Track use however can be used on Street by confident and competent drivers.
Operating Temperature Range: 0 ~ 400 ℃
Friction Coefficient: 0.32 to 0.38
Pad Material: Non-Asbestos-Based hardening type

43022-FN2-000 $217.69

PART-NUMBER

SEEKER BRAKE PAD - TYPE E [REAR] FD2 (BREMBO CALIPER)

Seeker Type E Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEK-TYPE--FD2R $92.02

PART-NUMBER

SEEKER BRAKE PAD - TYPE E [FRONT] FN2

Seeker Type E Brake Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEK-TYPE-E-FN2F $118.31

PART-NUMBER

SEEKER BRAKE PAD - TYPE E [REAR] FN2

Seeker Type E Pads are an entry-level pad that is affordable and suitable for use on the Street and under Sports driving conditions. Reaches operating temperature quickly. Minimal dust production.

Suitable for Street/Sports Use, Operating Temperature 0° ~ 600°

SEEK-TYPE--FN2R $92.02

■ BRAKE HOSES


PART-NUMBER

SEEKER RED COAT BRAKE HOSE [SET] FN2

It SEEKER Stainless steel mesh brake line is covered with a stainless steel mesh very strong Teflon tube in high temperature and high pressure, so we have adopted a structure of perfection, such as performing a Red clear coat that even under high pressure and very hot with little expansion It will deliver without stable performance. Please try the brake touch and linear braking force that was catchy that not be obtained by genuine hose.

RED-COAT-FN2 $446.95

AERO / BODY / EXTERIOR
■ EXTERIOR Top of Page

■ STICKERS / DECALS


PART-NUMBER

SPOON WINDSHIELD BANNER

Spoon Windshield Banner is a functional and stylish upgrade. For fitment of Roll-Cage, the Sun-Visors must be removed for cage-clearance. The Spoon Banner replaces the function of the Window visors and can be trimmed to suit individual vehicle or personal requirments. Also weight saving through removal of window visors is a benefit.
Width: 185 x Height: 1450mm.

INSTALLATION TIPS:
- Wash car normally.
- Clean windscreen with Wax/Grease Remover.
- ISO Alcohol Wipe. - mix 1 droplet detergent with 2/3 Water 1/3 methylated spirits into Spray squirter.
- Squirt glass under banner. - Position Banner.
- Squeegee Water and Bubbles out.
- Trim edges with blade.
- Leave to dry in sun 1 Hour.

ALL-90000-000 $63.13

PART-NUMBER

SPOON REAR WINDOW STICKER, BLACK [800mm]

Spoon Rear Window Sticker as used on the Spoon Race and Demo Cars since ~1987.

ALL-90000-B02 $37.88

PART-NUMBER

SPOON REAR WINDOW STICKER, WHITE [800mm]

Spoon Rear Window Sticker as used on the Spoon Race and Demo Cars since ~1987.

ALL-90000-W02 $37.88

PART-NUMBER

SPOON DOOR STICKER, BLACK [300mm]

Spoon 300mm Sticker for use on door, under the mirror.

ALL-90000-B01 $18.94

PART-NUMBER

SPOON DOOR STICKER, WHITE [300mm]

Spoon 300mm Sticker for use on door, under the mirror.

ALL-90000-W01 $18.94

PART-NUMBER

SPOON TEAM STICKER, BLACK [200/100mm]

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.

ALL-90000-B00 $17.42

PART-NUMBER

SPOON TEAM STICKER, WHITE [200/100mm]

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.

ALL-90000-W00 $17.42

PART-NUMBER

SPOON-SPORTS STICKER [BLACK] *NEW*

New School Spoon Sports Logo Sticker - us used on doors of modern Honda vehicles such as Fit GK5, CRZ, S660 etc.
H40mm x W250mm.

ALL-90000-B21 $18.94

PART-NUMBER

SPOON-SPORTS STICKER [WHITE] *NEW*

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.
H40mm x W250mm.

ALL-90000-W21 $18.94

PART-NUMBER

SPOON MARK STICKER SET [TSURU]

Spoon Mark Sticker Set - featuring the famous Spoon 'Tsuru' logo, based on the famous 'Spoon Curve' at Suzuka Circuit.
Each set icludes:
2 x Large Stickers - for use on Rear Bumper above Exhaust Tip.
3 x Medium Stickers - for use on Doors.
3 x Small Stickers - perfect for use on Helmets etc.

ALL-90000-T10 $13.93

PART-NUMBER

TYPE ONE MARK STICKER

Type One Mark Sticker - as used on Spoon Carbon Spoiler and other places.

ALL-90000-T01 $8.71

PART-NUMBER

TYPEONE LOGO STICKER *NEW*

New School Type One Sticker, die-cut vinyl style for use on Door etc.

ALL-90000-T21 $18.29

PART-NUMBER

TEAM SEEKER METAL STICKER [PLAQUE]

It is the official sticker of SEEKER.
It will be the specification feeling of luxury that has put the color in anodized aluminum metal plate.
Exterior is possible of course also attached easily into the interior of the dashboard and the like.
This sticker is the hope in the opportunity to make more of the communication field.

Plaque Style, Size: 100x36mm

SEEK-TEAM-PLAQ

$17.04


PART-NUMBER

SEEKER EMBLEM [BADGE]

Chrome Badge perfect for use on Bootlid / Tailgate or Dashboard.
SEEKER logo is a three-dimensional design and emblem which has been subjected to luxurious black chrome plating process. Black chrome has presence is rich in expression and or black out or shining dazzlingly by the angle at which the light hits. *Bright Chrome no longer available.
160mm x 18mm

PART-NUMBER PART-NUMBER

SEEK-EMBLEM $62.44

PART-NUMBER

SEEKER LOGO STICKER [S] 150mm

150mm Sticker. WHT/SILV/BLK

 

SEEK-LOGO-S $17.04

PART-NUMBER

SEEKER LOGO STICKER [M] 300mm

300mm Door Sticker (Black).

 

SEEK-LOGO-M $28.39

PART-NUMBER

SEEKER LOGO STICKER [L] 800mm

800mm Rear Window Sticker (White).

 

SEEK-LOGO-L $68.15

PART-NUMBER

SEEKER HELMET VISOR STICKER

It is a competition style sticker pasted on the visor of the helmet. Front view of the part that is a sticker pasted on to be printed on the punching material of the sticker also we have secured.
You can use to cut according to the visor shape.
Width: ~435mm

PART-NUMBER PART-NUMBER

SEEK-VISOR $65.22

■ AERO / BODY


PART-NUMBER

SPOON CARBON BONNET FN2

Carbon material is superior in strength, since addition is a lightweight, it has been adopted in different parts in the world of motor sports, and has a unique texture. Bonnet, lighter about 1/2 to 8.2kg from 15.5kg normal EG, EK in the system. It is to the same effect as the air conditioning is not installed. To reduce understeer, this weight reduction, will exhibit good handling characteristics essential to sports driving mitigation of the burden of turning a quick, to the brake, and improved acceleration performance in FF car front heavy. Product has made use of texture of black carbon fiber Lacey. The mounting method in the same lock and STD, hood pin is not required. I will also work such as window washer.

60100-FN2-000 $1,251.74

PART-NUMBER

SEEKER FRONT HALF SPOILER [FRP] FN2

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

PART-NUMBER

FSPOIL-FRP-FN2 $512.67

PART-NUMBER

SEEKER FRONT HALF SPOILER [CARBON] FN2

Available in Raw Carbon or with UV Protective coating (at additional cost).

PART-NUMBER

FSPOIL-CAR-FN2 $933.33

PART-NUMBER

SEEKER REAR SPOILER [FRP] FN2

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

PART-NUMBER

RSPOIL-FRP-FN2 $460.09

PART-NUMBER

SEEKER REAR SPOILER [CARBON] FN2

Available in Raw Carbon or with UV Protective coating (at additional cost).

PART-NUMBER

RSPOIL-CAR-FN2 $801.87

PART-NUMBER

SEEKER CANARD SET [FRP] FN2

Has been further design in order to improve the traction performance to suppress the front lift of FN2 Civic is a front-wheel drive. It can be installed only in the drilling, etc. included double-sided tape without the need at all to the body, but the mounting strength in order to use the difference in level of genuine bumper is not a problem. The CARBON are also available.
Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

PART-NUMBER PART-NUMBER

CANRD-FRP-FN2 $328.64

PART-NUMBER

SEEKER CANARD SET [CARBON] FN2

Has been further design in order to improve the traction performance to suppress the front lift of FN2 Civic is a front-wheel drive. It can be installed only in the drilling, etc. included double-sided tape without the need at all to the body, but the mounting strength in order to use the difference in level of genuine bumper is not a problem. The FRP are also available.
Available in Raw Carbon or with UV Protective coating (at additional cost).

PART-NUMBER

CANRD-CAR-FN2 $499.53

PART-NUMBER

SEEKER FOG LAMP COVER [FRP] FN2

It is made ​​of FRP fog lamp cover. Of course, if you remove the genuine fog lamp, it is also possible to put the cover from the top, leaving the genuine fog. It was a simple shape that does not stand out so that it does not interfere with the design of the front mask. In the case of FN2, fog lamp lower edge height and go to some extent lower the vehicle height is the inspection incompatibility will be less than 250mm. In that case, it will be the vehicle inspection fit in that I am wearing this product. (Minimum ground clearance is required 90mm ensure) mounting is easy mounting of the only double-sided tape.
Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

PART-NUMBER PART-NUMBER

FOG-FN2-FRP $170.89

PART-NUMBER

SEEKER GRILLE [FRP] FN2

Available with Gel Coating or can be painted to OEM Paint codes (at additional cost).

PART-NUMBER PART-NUMBER

GRILLE-FRP-FN2 $394.36

PART-NUMBER

SEEKER GRILLE [CARBON] FN2

Available in Raw Carbon or with UV Protective coating (at additional cost).

PART-NUMBER PART-NUMBER

GRILLE-CAR-FN2 $611.26

PART-NUMBER

SEEKER DOOR HANDLE COVER [CARBON] FN2

Set of 2 Carbon door handle covers.
Available in Raw Carbon or with UV Protective coating (at additional cost).

HAND-CAR-FN2 $302.35

■ MIRRORS


PART-NUMBER

SPOON HYDRO-BLUE WIDE MIRROR FN2

Spoon Mirrors install over the existing standard wing mirrors featuring 900R Curvature for increased field of view with low-distortion.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.
Hydrophilic Blue coating is also water and dirt resistant.

76203-FN2-020 $171.43

INTERIOR ACCESSORIES
■ INTERIOR Top of Page

PART-NUMBER

SPOON BLUE WIDE REAR VIEW MIRROR FN2

Spoon Mirrors install over the existing standard mirror featuring 14000R Curvature for increased field of view with low-distortion - Basically the same field of view as a 'Broadway' mirror with just the small compact size of the standard mirror body.
Titanium Oxide Optical Coating provides a photocatalytic effect to reduce glare / dazzling effect from the lights of other vehicles and reduce driver fatigue.

76400-BRM-000 $45.17

PART-NUMBER

SPOON STEERING WHEEL [340mm]

Spoon Steering Wheel is manufactured by Momo Italy utilising an unique rim contour and 340mmm diameter specifically designed for maximum grip under race conditions - especially suited for FF vehicles with extreme 'kick-back'. Covered in the highest quality Itallian leather with Red-stitching.
Includes Spoon Horn Button (not sold separately).

ALL-78500-000 $407.52

PART-NUMBER

SEEKER RACING SPEC STEERING WHEEL [325mm]

It is Kodawari of the steering wheel in pursuit of the sport driving, including race, and the like. 
The high rigidity and a 6061 aluminum alloy 5t with excellent corrosion resistance using the base frame epidermis was arrogance luxury smooth leather. (Using a punching leather to 9 o'clock, 3 o'clock in order to improve the familiar). Grip has adopted a finger Gakari good shape a slightly thick as can be driving and disconnect the power.  Stitch of the portion of force is applied does not have a worry that leather may come off even if I use it for many years I have been put in a cross-shaped. 
In addition to place a well-balanced logo and the top mark and our slogan to several places body finished in a stylish design. 
"R-SPIRIT" horn button of the dedicated will be attached. ■ specification steering outer diameter: 325mm Frame: 6061 aluminum alloy 5t Stitch: Red color of the cross-stitch epidermis: Luxury Black smooth leather (partially use the punching leather) Embroidery: Top on the surface 6 o'clock SEEKER logo, at 12 o'clock mark, embroidery our slogan on the back 12 o'clockhorn: dedicated "R-SPIRIT" horn button included

PART-NUMBER PART-NUMBER PART-NUMBER

SEEK-S-WHEEL $460.09

PART-NUMBER

SPOON STEERING BOSS [SRS-DELETE] FN2

Spoon Steering Boss Kits are die-cast aluminium units designed for minimal weight and maximum strength.
Suitable for use with Spoon, Momo and Nardi wheels.
Includes SRS Delete Harness to eliminate the Airbag Warning Light.
Includes Steering Wheel Bolts (Allen style).

78512-FD2-000 $130.62

PART-NUMBER

SEEKER LED ROOM LAMP-A [FRONT] FN2

The space for the specially designed vehicle can be placed an overall LED to take full advantage of, we have realized an overall bright and friendly emission rather than a partial emission. Does not require processing or the like upon mounting is easy mounting.
In a center lamp vehicle We will offer a "LED room lamp B" (sold separately).

PART-NUMBER

LED-LAMP-A-FD2 $73.61

■ SEATS / SEAT RAILS


PART-NUMBER

SPOON CARBON BUCKET SEAT

Spoon Racing Carbon Bucket Seats are designed to hold the driver firmly into place in the perfect driving position. Ultra lightweight Carbon Fibre construction, weighing in at only 5.7Kg, this is the ultimate Racing Seat for your Honda. Designed to reduce driver-fatigue through long races.

ALL-81100-000 $1,502.09

PART-NUMBER

SEEKER x BRIDE FULL BUCKET SEAT [FRP]

It is a full bucket seat of the collaboration model of the BRIDE boasts a high rigidity and excellent hold of. The underlying shell has adopted the VIOS3 with the most matches easily seat position as much as possible down easy structure in Japanese type (Low MAX).
Shoulder support is somewhat smallish because, wearing indoor space to narrow a S2000 is also available.
This collaboration model inherits the design of the predecessor full bucket seat that had gotten popular, adopt a skin fabric red and black two-tone specification.
The BRIDE sheet somewhat strong competition image by the headrest further subjected to a dedicated logo embroidery to add a bright red stitch performance is intact, we have succeeded in that to be transformed into optimal fashionable to street youth It was.
BRIDE-made seat back protector in this product (black) is standard equipment.
Seat rail (sold separately) is a vehicle inspection also safe because it becomes a security standard conform if you can use in combination with made BRIDE.
Please feel free to contact us so we will also sell BRIDE seat rail.

Note: If you are attached to the S2000 has a case where BOX lid portion that housed the trunk opening and closing the switch can not be to interfere with the fully open to the sheet. In each case there is no problem if it is possible to slide the seat forward.

■ Specifications
Shell: FRP Silver Shell (VIOS3-based)
Skin fabric: Black & Red logo dedicated logo and dedicated Red stitch Add
Sheet weight about 7.1kg (not including the seat rails)

SEEK-BRID-FRP $1,248.82

PART-NUMBER

SEEKER SEATBELT WARNING CANCELER [ALUMINIUM]

Eliminates seatbelt warning light when using harness at the circuit / motorsport. Simply plug in to your stock seatbelt plug while you are not using the standard sash-belts.

PART-NUMBER

SEEK-BELT-ALU $33.55

PART-NUMBER

SEEKER SUPER LOW-POSITION SEAT RAIL [RHS] FN2

Side is kept low position seat rail which corresponds to the full bucket seat of.
Since it is possible to adjust the front and rear, height, you can set the appropriate seat position in sports driving.

RAIL-FN2-RHS $289.20

PART-NUMBER

SEEKER SUPER LOW-POSITION SEAT RAIL [LHS] FN2

Side is kept low position seat rail which corresponds to the full bucket seat of.
Since it is possible to adjust the front and rear, height, you can set the appropriate seat position in sports driving.

RAIL-FN2-LHS $289.20

■ SHIFT KNOBs


PART-NUMBER

SPOON SHIFT KNOB, ALUMINIUM [6MT]

Spoon Alloy Shift Knob is the same countour as the Duracon however it is a little heavier at ~130g.
Includes 6MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

ALL-54102-002 $52.90

PART-NUMBER

SPOON SHIFT KNOB, DURACON [6MT]

Spoon Duracon Shift Knob is made from a special Heat-Resistant Thermo-Plastic - perfect to resist heat-soak from the transmission and exhaust and heat from direct sunlight and Summer cabin temperatures. Lightweight design at just ~80g
Includes 6MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.
The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O) and carbon-carbon (-C-C- bond) comonomer groups are incorporated into its main chain. Therefore the copolymer has superior chemical and thermal stability, compared with acetal homopolymer. Acetal co-polymer is well-balanced in terms of mechanical, chemical and thermal properties, and its superior moldability allows it to be widely employed in various industrial fields.
Source: PolyPlastics.

ALL-54102-003 $52.90

PART-NUMBER

SEEKER HEAVY SHIFT KNOB 400g [6MT] FN2

Same shape and size as Honda genuine shift knob - spherical type.
It was it possible to reliably shift work as well as to achieve a very moist and shift feel from its weight. Further, in order to perform a shift operation using the weight of 400g, it is gentle to be characterized for the respective gears.
We were greatly improved wear resistance and oxidation resistance subjected to TiAlN (titanium aluminum nitride coating) process on the surface. Furthermore SEEKER logo and shift patterns ( 6MT) to the top part we laser etching. Distinctive color and texture with the TiAlN, and enjoy the feel of heavyweight Come. ■ stainless steel surface treatment: TiAlN (titanium aluminum nitride coating). Weight: about 400g 5MT dedicated Honda genuine nuts separately if ■ genuine knob of car not a nut fixed You will need.

SEEKER: 400g (Stainless Steel)
STOCK: ~140g (Aluminium)

SEEK-SHIFT-6MT $120.94

PART-NUMBER

SEEKER SHIFT BOOT COLLAR [OEM NUT] FN2, FD2

Machined aluminium shift boot collar for use with aftermarket gearknobs on modern Hondas.

For CR-Z · S660 of GE-FIT and GK-FIT and 1 parts of which have taken a system that connects the shift boot and genuine knob, not good appearance when combined with external shift knob. This is especially recommended for the appropriate type of vehicle so you can improve the aesthetics in that you use this shift boot color.
In addition, since we have a standard feature an O-ring on the inside of the boot color, it is easily possible to set the vertical position of the color.
It also prevents abnormal noise which is generated by the vibration of the engine.

And removing the genuine color is easy mounting of only tighten this product with the supplied tie wrap.

PART-NUMBER

SEEK-SBC-FD2 $30.37

PART-NUMBER

SEEKER METER HOOD [FRP] FN2

3-Guage Holder, Integrated Dash-Mounting. As a result of pursuing the visibility of each meter, while as much as possible ensure the forward view, it has adopted a three-dimensional shape to draw a triangle. So we subjected to a semi-gloss black paint to match the interior of the FIT You can use it as it is aesthetic. Mounting is easy mounting of the only strong double-sided tape attached.
※ GE system FIT all models fit
※ FRP-made semi-gloss black painted
※ 60Φ meter three can be mounted (the meter is not attached)

SEEK-HOOD-FN2 $328.64

PART-NUMBER

SPOON SWITCH FN2 *DISCONTINUED*

78512-FD2 $0.00
 
 
 

■ Prices listed are in AUD - Gaijin-Garage can only accept payment in the form of AUD (Australia Dollars).
■ Item pricing correct as at August 1st, 2016 (nominal exchange rate of 78.00JPY/1AUD). Prices listed are subject to change without notice. Gaijin-Garage aims to bring you the Spoon Sports and Seeker product ranges at the best possible prices however, increases of the cost of business, fluctuations in exchange rates, changes to shipping and manufacturing costs, taxes and duties applied (and other factors beyond our control) may result in price changes. When possible, Gaijin-Garage will try to absorb these costs and attempt to avoid passing them on to the Customer. Gaijin-Garage will inform the Customer of any change in price prior to finalising any orders or shipment.
■ Items that have been hand-delivered or picked up by the Customer are still subject to shipping charges and relevant taxes.
■ International Orders are exempt from GST (Australian sales tax) however any taxes or duties incurred at the Cutomer's destination country are the responsibility of the Customer. Goods received into Australia may be subject to taxes and duty on entry to Australia - these fees may apply to international orders however sales-tax on the purchase itself is exempt.
■ Gaijin-Garage are not responsible for any typographical errors in product pricing or technical specifications (etc.) listed on this website or on any other material.
■ Product descriptions have been translated from Japanese, some descriptions may be a direct software translation - please contact us for any clarification.
■ Discontinued parts listed for reference purposes only - These parts are no longer in production and therefore not available for purchase.
■ PLEASE READ OUR TERMS AND CONDITIONS FOR MORE INFORMATION.

 
#95 Spoon Race Car News
Click Here to return to the Gaijin-Garage Homepage  
   
■ Spoon-Sports
■ Seeker
■ Rigid Collar™
■ Honda Genuine
■ Modulo / Access
■ Email sales@gaijin-garage.com
■ Phone +61 422 519 108
■ Facebook
■ Instagram
■ Youtube
 
© Gaijin-Garage 2016. Disclaimer | FAQ | Top of Page
PayPal - Verified Trader
リジカラ RIGID COLLAR Australia