SPOON SPORTS OFFICIAL DEALER
Gaijin-Garage Homepage About Gaijin-Garage Frequently Asked Questions Contact Gaijin-Garage Place your Order

 

SEEKER OFFICIAL DEALER
 
POWER UNIT (SPOON) INTAKE / EXHAUST (SPOON) DRIVETRAIN (SPOON) CHASSIS / BODy REINFORCEMENT (SPOON)
SUSPENSION SYSTEM (SPOON) BRAKE SYSTEM (SPOON) AERO / BODY (SPOON) INTERIOR (SPOON)

■ BALLADE SPORTS OFFICIAL DEALEREntire Product Catalogue.


POWER-UNIT

■ ENGINE ACCESSORIES


PART-NUMBER

BALLADE-SPORTS ANO-BLUE VALVE COVER [F20C/F22C] AP1 / AP2

Ballade anodized-blue Valve cover.

■Anodized Blue Finish
■Please specify engine code and year

BS-TCT-AP1 TBA

PART-NUMBER

BALLADE-SPORTS TIMING-CHAIN TENSIONER [TCT] AP1 / AP2

Ballade Sports Timing Chain Tensioner.

OPTIONS
■Anodized Blue Finish
■Aluminium Finish

PART-NUMBER PART-NUMBER

BS-TCT-AP1 TBA

PART-NUMBER

BALLADE-SPORTS TIMING-CHAIN TENSIONER [COMBO] AP1 / AP2

Ballade Sports Timing Chain Tensioner.

OPTIONS
■Anodized Blue Finish
■Aluminium Finish

PART-NUMBER PART-NUMBER

BS-TCTC-AP1 TBA

PART-NUMBER

IGNITION COIL, SET OF 4 00-03 [OEM] AP1 00-03

Honda Genuine S2000 Ignition Coil Set (Qty 4)

PART-NUMBER PART-NUMBER

OEM-COIL-0003 TBA

PART-NUMBER

IGNITION COIL, SET OF 4 04-05 [OEM] AP1 04-05

Honda Genuine S2000 Ignition Coil Set (Qty 4)

PART-NUMBER PART-NUMBER

OEM-COIL-0405 TBA

PART-NUMBER

IGNITION COIL, SET OF 4 06-09 [OEM] AP2 06-09

Honda Genuine S2000 Ignition Coil Set (Qty 4)

PART-NUMBER PART-NUMBER

OEM-COIL-0609 TBA

BS-ATI-HARM

ATI SUPER HARMONIC STREET DAMPER AP1 / AP2

The ATI F20/22 S2000 Super Damper comes with laser-etched timing marks and is a direct replacement for the stock OEM unit. The Damper features a single serpentine belt drive on the outer shell to utilize the factory serpentine belt set-up and comes with a removable bolt-on P/S pulley.

■ All ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition use.

BS-ATI-HARM TBA

PART-NUMBER

OIL-PAN BAFFLE, BOLT-IN [AP1] AP1 00-05

An oil pan baffle serves a crucial role of protecting the engine from oil starvation due to heavy acceleration, and lateral loads. Ballade Sport's simple yet effective design allows for a very easy bolt-in install. No longer will you need to buy a separate oil pan or wait for a core exchange in order to weld in a baffle. Simply bolt the Ballade Sports baffle on to the OEM windage tray and done.

Hardware included.

PART-NUMBER

BS-OPB_AP1 TBA

PART-NUMBER

OIL-PAN BAFFLE, BOLT-IN [AP2] AP2 06-09

An oil pan baffle serves a crucial role of protecting the engine from oil starvation due to heavy acceleration, and lateral loads. Ballade Sport's simple yet effective design allows for a very easy bolt-in install. No longer will you need to buy a separate oil pan or wait for a core exchange in order to weld in a baffle. Simply bolt the Ballade Sports baffle on to the OEM windage tray and done.

Hardware included.

PART-NUMBER

BS-OPB_AP2 TBA

PART-NUMBER

BALLADE-SPORTS VALVE SPRING [SET] AP1 / AP2

Ballade Sports S2000 Valve Spring Set provides maximum lift and helps counter the effects of spring surge. The increased spring rate over stock springs help reduce valve guide wear and piston to valve contact by preventing valve float. These have been track tested under harsh road race conditions. These are perfect solution for naturally-aspirated using Stock OEM Retainers and Spring bases. These are direct fit replacement. No additional parts required for installation.

Technical information:

TYPE: Single Spring
OUTSPR.OD: 31.6mm
OUTSPR.ID: 22.7mm
PRESS.SEAT: 95 @ 40.4
PRESS.OPEN: 253 @ 12
MAX LIFT: 17.70mm
COIL BIND: 22.7mm
RATE: 13.2mm

BS-VALVE-SPRING TBA

PART-NUMBER

BALLADE-SPORTS VTEC SOLENOID GASKET, O-RING [SET] AP1 / AP2

Combo includes Ballade Sports Upper 'O-Ring' and Honda OEM VTEC Gasket.

BS-VTO-RING TBA

 
PART-NUMBER

BALLADE-SPORTS A/C RELOCATION KIT [NOTES] AP1 / AP2

00-09 Honda S2000 A/C Relocation Kit

PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER

BS-S2K-ACR TBA

PART-NUMBER

ULTRA FLANGE-II [OEM] AP1 / AP2

High-temperature silicone liquid gasket.
Unique formula is non-acidic and won't corrode aluminum like other silicon gasket products will.
For use in applications not requiring solid gaskets.

OEK-ULTRA-FLA TBA

PART-NUMBER

HEAD STUD SET, F20C [OEM] AP1 / AP2

OEM Replacement 00-09 S2000 Cylinder Head Studs

OEM-STUD-F20C TBA

PART-NUMBER

RWD K-SWAP COOLANT HOUSING, UPPER [12AN] AP1 / AP2

12AN Fitting Size. K-Tuned K20 RWD Upper Coolant Housing.
When putting a K20 into a RWD vehicle the housing typically points towards the firewall. This housing is designed for the fitting to come straight off the head. It uses a -16AN port with options 1.25" silicone fitting, -12AN fittings. You can easily create a custom setups. We include the fittings needed to retain the factory recirculation line. All hardware and plugs are included.

The K-Tuned Upper Coolant Housing will compliment our Swivel Neck Thermostat and our Water Pump Block off Plate. All of these parts allow plenty of options for custom and race engine cooling setups.

***Water Temp Sensor not included***

Applications: ■K20A ■K20A2 ■K20A3 ■K20Z1 ■K24A1 (Cylinder Heads)

KT-KRWD-12AN TBA

PART-NUMBER

RWD K-SWAP COOLANT HOUSING, UPPER [16AN] AP1 / AP2

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads.

16AN Fitting Size. K-Tuned K20 RWD Upper Coolant Housing.
When putting a K20 into a RWD vehicle the housing typically points towards the firewall. This housing is designed for the fitting to come straight off the head. It uses a -16AN port with options 1.25" silicone fitting, -16AN fittings. You can easily create a custom setups. We include the fittings needed to retain the factory recirculation line. All hardware and plugs are included.

The K-Tuned Upper Coolant Housing will compliment our Swivel Neck Thermostat and our Water Pump Block off Plate. All of these parts allow plenty of options for custom and race engine cooling setups.

***Water Temp Sensor not included***
Applications: ■K20A ■K20A2 ■K20A3 ■K20Z1 ■K24A1 (Cylinder Heads)

KT-KRWD-16AN TBA

PART-NUMBER

RWD K-SWAP COOLANT HOUSING, UPPER [1.25" HOSE] AP1 / AP2

HOSE 1.25". K-Tuned K20 RWD Upper Coolant Housing.

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads.

16AN Fitting Size. K-Tuned K20 RWD Upper Coolant Housing.
When putting a K20 into a RWD vehicle the housing typically points towards the firewall. This housing is designed for the fitting to come straight off the head. It uses a -16AN port with options 1.25" silicone fitting, -16AN fittings. You can easily create a custom setups. We include the fittings needed to retain the factory recirculation line. All hardware and plugs are included.

The K-Tuned Upper Coolant Housing will compliment our Swivel Neck Thermostat and our Water Pump Block off Plate. All of these parts allow plenty of options for custom and race engine cooling setups.

***Water Temp Sensor not included***
Applications: ■K20A ■K20A2 ■K20A3 ■K20Z1 ■K24A1 (Cylinder Heads)

KT-KRWD-125 TBA

■ COOLING


PART-NUMBER

BALLADE-SPORTS DUAL CORE RADIATOR [AP1] AP1

00-05 S2000 Dual Core Aluminum Radiator by Ballade Sports.

The Ballade Sports all-aluminum, Dual Core Radiator is a direct fit exactly the same as with the original manufacturers part. This provides superior engine cooling compared to the factory Single Core passage radiators. No need to move fittings, drill additional holes, or stretch hoses to get their radiators to fit properly. Drop it in, bolt it down, and hook it up! No unpleasant surprises guaranteed!

Fits All 00-09 S2000 Models.
Compatible With Stock Radiator Fan
1.3 Bar Radiator Cap included!
Titanium Badge Plate!
Core Size: 14-3/4" x 25-1/2" x 2-1/16"
Tank Size: Inlet: 26-1/2" x 2-1/2" Outlet: 26-1/2" x 2-1/2"
Hose Fittings: Top: 1-1/4" /Bottom 1-1/4"
Optional Radiator Stay Colours: ■BLACK ■BLUE ■GUNMETAL ■RED
LIMITED LIFETIME WARRANTY

PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER

BS-RAD-AP1 TBA

PART-NUMBER

BALLADE-SPORTS DUAL CORE RADIATOR [AP2] AP2

06-09 S2000 Dual Core Aluminum Radiator by Ballade Sports.

The Ballade Sports all-aluminum, Dual Core Radiator is a direct fit exactly the same as with the original manufacturers part. This provides superior engine cooling compared to the factory Single Core passage radiators. No need to move fittings, drill additional holes, or stretch hoses to get their radiators to fit properly. Drop it in, bolt it down, and hook it up! No unpleasant surprises guaranteed!

Fits All 00-09 S2000 Models.
Compatible With Stock Radiator Fan
1.3 Bar Radiator Cap included!
Titanium Badge Plate!
Core Size: 14-3/4" x 25-1/2" x 2-1/16"
Tank Size: Inlet: 26-1/2" x 2-1/2" Outlet: 26-1/2" x 2-1/2"
Hose Fittings: Top: 1-1/4" /Bottom 1-1/4"
Optional Radiator Stay Colours: ■BLACK ■BLUE ■GUNMETAL ■RED
LIMITED LIFETIME WARRANTY

PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER

BS-RAD-AP2 TBA

PART-NUMBER

Ballade Sports Aluminum Radiator Stay AP1 / AP2

Optional Radiator Stay Colours: ■BLACK ■BLUE ■GUNMETAL ■RED

PART-NUMBER TBA

PART-NUMBER

HEATER VALVE RELOCATION KIT [ALLOY CRAFT] AP1 / AP2

Alloy Craft Honda 00-09 S2000 Heater Valve Relocation Bracket
OPTIONS: ■A ■B ■C ■D ■E

PART-NUMBER PART-NUMBER

PART-NUMBER TBA

PART-NUMBER

ENGINE MOUNT SET [BALLADE SPORTS] AP1 / AP2

00-09 S2000 Replacment Engine & Transmission Mount Kit

Ballade Sports OEM Plus Engine and Transmission Mounts are the perfect replacement for your broken and torn motor mounts. Factory Honda motor mounts are fluid filled to absorb engine vibration, however they are known for tearing after they have aged.

Our Ballade Sports OEM Plus Engine and Transmission Mounts are the solution to this issue. We manufactured these to never tear open by using a soft but solid rubber construction. These are mounts do not increase engine vibration at idle or throughout the chassis. These can be considered just like a factory motor mount with out the flaws/issues.

Kit includes:
2x Engine Mounts
2x Transmision Isolators
Lifetime Warrant from Defects

BS-ENG-AP1 TBA

■ ELECTRONICS


BS-S2K-APBE

BALLADE SPORTS AIR PUMP BYPASS EMULATOR [NOTES] AP1

Ballade Sports 00-05 S2000 Air Pump Bypass Emulator.

PART-NUMBER

BS-S2K-APBE TBA

BS-S2K-HAR-AEM

K-SERIES ECU CONVERSION JUMPER HARNESS [AEM EMS] AP1 / AP2

Ballade Sports K-Series ECU Conversion Jumper Harness for AEM EMS

■ AEM EMS

BS-S2K-HAR-AEM

TBA


BS-S2K-HAR-KPRO

K-SERIES ECU CONVERSION JUMPER HARNESS [HONDATA K-PRO] AP1 / AP2

Ballade Sports K-Series ECU Conversion Jumper Harness for Hondata KPRO

■ HONDATA KPRO

BS-S2K-HAR-KPRO

TBA


INTAKE-EXHAUST
■ INTAKE / eXHAUST SYSTEM Top of Page

■ EXHAUST SYSTEM


PART-NUMBER

BALLADE SPORTS TRI-Y EXHAUAST MANIFOLD [4-2-1] AP1 / AP2

Ballade Sports S2000 Sequential Tri-Y Header /Exhaust Manifold
The Ballade Sports Exhaust Manifold features 5 step piping size with each step helping in anti-reversion, and also backing up of exhaust flow.
Weighing at 5.4Kg less than stock (OEM is 11.5KG), the primary runners are 1.75 inch, to 1.875 inch, to 2.00 inch, to 2.25 inch, to 2.5 inch merge collector. Stepping the header pipe size helps direct flow and increase scavenging, thus allowing for a faster exit. The S2000 firing order is cyl 1-3-4-2, therefore our runner design is sequential, creating a venturi effect. This application fits standard factory catalytic converter location.
Wheel horsepower gains are approximately 10whp mid-range dependent on application setup. Product Feature Update!! We have now added the use of the OEM Honda Upper Heat Shield.

OPTIONS:
■ You can now have a stealth look to our Ballade Header simply by re-using your original Honda header heat shield. Just add this feature in the drop down box when before adding to cart.

PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER

BS-S2K-EXM TBA

PART-NUMBER

BALLADE-SPORTS HIGH-FLOW CAT, STEP-UP [63.5mm] AP1 / AP2

63.5mm Ballade Sports 00-09 S2000 Step Up High Flow Catalytic Converter.

FEATURES:
63.5mm header flange and Inlet Pipe
Choice of 63.5mm, 70mm, or 75mm Pipe Outlet
Increased horsepower over stock
Utilizes stock catalytic converter heatshield for an OEM look.
Welded CEL elminator
Stainless steel construction
Gasket and 14mm Hardware included

PART-NUMBER

BS-HFC-63.5 TBA

PART-NUMBER

BALLADE-SPORTS HIGH-FLOW CAT, STEP-UP [70mm] AP1 / AP2

70mm Ballade Sports 00-09 S2000 Step Up High Flow Catalytic Converter.

FEATURES:
63.5mm header flange and Inlet Pipe
70mm Pipe Outlet
Increased horsepower over stock
Utilizes stock catalytic converter heatshield for an OEM look.
Welded CEL elminator
Stainless steel construction
Gasket and 14mm Hardware included

PART-NUMBER

BS-HFC-70 TBA

PART-NUMBER

BALLADE-SPORTS HIGH-FLOW CAT, STEP-UP [76mm] AP1 / AP2

76mm Ballade Sports 00-09 S2000 Step Up High Flow Catalytic Converter.

FEATURES:
63.5mm header flange and Inlet Pipe
75mm Pipe Outlet
Increased horsepower over stock
Utilizes stock catalytic converter heatshield for an OEM look.
Welded CEL elminator
Stainless steel construction
Gasket and 14mm Hardware included

PART-NUMBER

BS-HFC-76 TBA

■ INTAKE SYSTEM


PART-NUMBER

BALLADE-SPORTS IM ADAPTER PLATE [S2000-K20] AP1 / AP2 (K-SWAP)

S2000 To K20 Intake Manifold Adaptor Plate.
K20 Intake Manifold adapter plate for use with s2000 F20c/F22c intake manifold.

OPTIONS: ■ Add a bored 69mm S2000 Intake Manifold for additional cost.

BS-S2K-KFIMA TBA

PART-NUMBER

BALLADE-SPORTS AIR FILTER, INTAKE KIT [80mm] AP1 / AP2

The Ballade Sport Air Filter and Induction Hose kit is designed to for use with 80mm ZDX Throttle Body.

PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER PART-NUMBER

BS-INTAKE-80MM TBA

PART-NUMBER

BALLADE-SPORTS THROTTLE BODY [70mm] AP1 / AP2

Ballade Sports 00-05 Honda S2000 Big Bore Throttle Body

Ballade Sports is proud to introduce its 70mm Throttle Body for Honda S2000. Ballade Sports’s 70mm Throttle Body is designed for bolt-on horsepower and torque gains by maximizing engine airflow.

Ballade Sports Throttle Bodies are precision die-cast from high-quality materials and include features fully machined bores and idle adjustment screws for fine tuning. All throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn't just provide more flow but retains smooth drivability and OEM throttle characteristics.

A larger throttle body is key to producing additional power throughout the power band on modified engines with increased airflow demands. Ballade Sports Throttle Bodies features a large, 70mm bore, which results in significant horsepower gains throughout the power band on NA and Forced Induction vehicles.Factory TPS sensor and MAP sensor is required. (not included)

PART-NUMBER PART-NUMBER

BS-TB-70MM TBA

DRIVETRAIN

■ TRANSMISSION ADAPTERS


BS-F2K-ADPT

K-SERIES TO S2000 TRANSMISSION ADAPTER AP1 / AP2

Ballade Sports K-Series to S2000 Transmission Adapter Plate

PART-NUMBER PART-NUMBER

BS-F2K-ADPT TBA

BS-F2K-FLY

BALLADE-SPORTS K-SERIES TO S2000 FLYWHEEL AP1 / AP2

Ballade Sports K-Series to S2000 Flywheel

 

BS-F2K-FLY TBA

■ DRIVESHAFTS


BS-S2K-LAXL

BALLADE-SPORTS OEM DRIVESHAFT, LHS AP1 / AP2

Honda S2000 OEM Axle Shaft – Passenger Side (RHD)

PART-NUMBER PART-NUMBER

BS-S2K-LAXL

TBA


BS-S2K-RAXL

BALLADE-SPORTS OEM DRIVESHAFT, RHS AP1 / AP2

Honda S2000 OEM Axle Shaft – Driver's Side (RHD)PART-NUMBER PART-NUMBER

BS-S2K-RAXL TBA

CHASSIS / BODY REINFORCEMENT

SUSPENSION

■ SPHERICAL BUSHING SETS


BS-AP1-SSB

BALLADE-SPORTS FULL SPHERICAL BUSHING KIT [BLACK] AP1

We are proud to present the Ballade Sports Full Spherical Spherical Suspension Bushing Kit for the Honda S2000. Ballade Sports strives for excellence in quality engineering and high performance; therefore we have designed a virtually maintenance free suspension bushing kit using the HIGHEST quality "American Made" Spherical Spherical joints for all the Lower Control Arm pivot points along with solid straight Upper Control Arm Bronze bushings. This kit is a must for road race enthusiast looking eliminate alignment deflection and slop from rubber control arm bushings. Until now, no other manufacturer has produced a Spherical kit for the S2000 that is protected from dust and debris.
■ Ballade Sports Spherical Cups use a rubber O ring to keep out contaminants, keeping the Spherical joint clean while on the road.
■ The Upper control arm bushings are made out of Steel/Bronze/Aluminum construction that is press fit and notched with Inner O rings on both ends keeping the bushing maintenance free.
■ The Front LCA rubber Compliance bushing is replaced with our Large Caster Spherical Spherical along with the matching Camber Spherical.
■ The Rear LCA and Toe Arm rubber bushings are also replaced with Spherical joints.
■ Please Note: The Spherical joint used for the rear Toe Arm also does double duty as an Anti-Bumpsteer kit to reduce snap over steer.
■ The Front & Rear Upper Control Arm bushings use our Bronze Straight Bushings replacing the factory rubber.

BS-AP1-SSB

TBA


BS-AP1-SSB-MF

BALLADE-SPORTS FULL SPHERICAL BUSHING KIT [MACHINED FINISH] AP1

We are proud to present the Ballade Sports Full Spherical Spherical Suspension Bushing Kit for the Honda S2000. Ballade Sports strives for excellence in quality engineering and high performance; therefore we have designed a virtually maintenance free suspension bushing kit using the HIGHEST quality "American Made" Spherical Spherical joints for all the Lower Control Arm pivot points along with solid straight Upper Control Arm Bronze bushings. This kit is a must for road race enthusiast looking eliminate alignment deflection and slop from rubber control arm bushings. Until now, no other manufacturer has produced a Spherical kit for the S2000 that is protected from dust and debris.
■ Ballade Sports Spherical Cups use a rubber O ring to keep out contaminants, keeping the Spherical joint clean while on the road.
■ The Upper control arm bushings are made out of Steel/Bronze/Aluminum construction that is press fit and notched with Inner O rings on both ends keeping the bushing maintenance free.
■ The Front LCA rubber Compliance bushing is replaced with our Large Caster Spherical Spherical along with the matching Camber Spherical.
■ The Rear LCA and Toe Arm rubber bushings are also replaced with Spherical joints.
■ Please Note: The Spherical joint used for the rear Toe Arm also does double duty as an Anti-Bumpsteer kit to reduce snap over steer.
■ The Front & Rear Upper Control Arm bushings use our Bronze Straight Bushings replacing the factory rubber.

BS-AP1-SSB-MF

TBA


AERO / BODY / EXTERIOR

■ FRONT LIP SPOILER / FRONT AERO BUMPER


BS-S2K-CRB_1

BALLADE-SPORTS ONE-PIECE TYPE-CR AP2 FRONT BUMPER AP1 / AP2

Polyurethane One Piece Honda 00-09 S2000 CR Style Bumper

■ Polyurethane
■ AP2 Style Bumper
■ One-Piece Design
■ Integrated Front Grille
■ Integrated Type-CR Front Spoiler
■ Integrated Brake-Ducts
■ Flat-Centre (Splitter Friendly)

BS-S2K-CRB_1 BS-S2K-CRB_1 BS-S2K-CRB_1 BS-S2K-CRB_1 BS-S2K-CRB_1

BS-S2K-CRB_1 TBA

BS-S2K-HTG

BALLADE-SPORTS OEM REPLACEMENT HARDTOP GLASS [W/O SEAL] AP1 / AP2

OEM Replacement 00-09 S2000 Hardtop Glass w/o Seal.

BS-S2K-HTG TBA
 

INTERIOR ACCESSORIES

BS-MOMO-350S

BALLADE SPORTS EDITION STEERING WHEEL [SUEDE]

Ballade Sports Edition Mod. 78 Steering Wheel by Momo.
■350mm (also available in 330mm)
■Suede Rim
■Ano-Blue Ballade Logo Horn Button
■Ballade Blue 'MOMO' logo

PART-NUMBER

BS-MOMO-350S TBA

BS-MOMO-350L

BALLADE SPORTS EDITION STEERING WHEEL [LEATHER]

Ballade Sports Edition Mod. 78 Steering Wheel by Momo.
■350mm (also available in 330mm)
■Leather Rim
■Ano-Blue Ballade Logo Horn Button
■Ballade Blue 'MOMO' logo

PART-NUMBER

BS-MOMO-350L TBA

■ Please Contact Us for any other Ballade Sports Products not listed.


 
 

■ Prices listed are in AUD - Gaijin-Garage can only accept payment in the form of AUD (Australia Dollars).
■ Item pricing correct as at August 1st, 2016 (nominal exchange rate of 78.00JPY/1AUD). Prices listed are subject to change without notice. Gaijin-Garage aims to bring you the Spoon Sports and Seeker product ranges at the best possible prices however, increases of the cost of business, fluctuations in exchange rates, changes to shipping and manufacturing costs, taxes and duties applied (and other factors beyond our control) may result in price changes. When possible, Gaijin-Garage will try to absorb these costs and attempt to avoid passing them on to the Customer. Gaijin-Garage will inform the Customer of any change in price prior to finalising any orders or shipment.
■ Items that have been hand-delivered or picked up by the Customer are still subject to shipping charges and relevant taxes.
■ International Orders are exempt from GST (Australian sales tax) however any taxes or duties incurred at the Cutomer's destination country are the responsibility of the Customer. Goods received into Australia may be subject to taxes and duty on entry to Australia - these fees may apply to international orders however sales-tax on the purchase itself is exempt.
■ Gaijin-Garage are not responsible for any typographical errors in product pricing or technical specifications (etc.) listed on this website or on any other material.
■ Product descriptions have been translated from Japanese, some descriptions may be a direct software translation - please contact us for any clarification.
■ Discontinued parts listed for reference purposes only - These parts are no longer in production and therefore not available for purchase.
■ PLEASE READ OUR TERMS AND CONDITIONS FOR MORE INFORMATION.

 
#95 Spoon Race Car News
Click Here to return to the Gaijin-Garage Homepage  
   
■ Spoon-Sports
■ Seeker
■ Rigid Collar™
■ Honda Genuine
■ Modulo / Access
■ Email sales@gaijin-garage.com
■ Phone +61 422 519 108
■ Facebook
■ Instagram
■ Youtube
 
© Gaijin-Garage 2016. Disclaimer | FAQ | Top of Page
PayPal - Verified Trader
リジカラ RIGID COLLAR Australia