SPOON SPORTS OFFICIAL DEALER
Gaijin-Garage Homepage About Gaijin-Garage Frequently Asked Questions Contact Gaijin-Garage Place your Order

 

SEEKER OFFICIAL DEALER
 

■ ACCESSORIES MERCHANDISEMost parts suitable for all models.


■ INTERIOR Top of Page

■ SHIFT KNOB


PART-NUMBER

SPOON SHIFT KNOB, ALUMINIUM [5MT]

Spoon Alloy Shift Knob is the same countour as the Duracon however it is a little heavier at ~130g.
Includes 5MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

ALL-54102-000 $52.90

PART-NUMBER

SPOON SHIFT KNOB, ALUMINIUM [6MT]

Spoon Alloy Shift Knob is the same countour as the Duracon however it is a little heavier at ~130g.
Includes 6MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

ALL-54102-002 $52.90

PART-NUMBER

SPOON SHIFT KNOB, DURACON [5MT]

Spoon Duracon Shift Knob is made from a special Heat-Resistant Thermo-Plastic - perfect to resist heat-soak from the transmission and exhaust and heat from direct sunlight and Summer cabin temperatures. Lightweight design at just ~80g
Includes 5MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.
The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O) and carbon-carbon (-C-C- bond) comonomer groups are incorporated into its main chain. Therefore the copolymer has superior chemical and thermal stability, compared with acetal homopolymer. Acetal co-polymer is well-balanced in terms of mechanical, chemical and thermal properties, and its superior moldability allows it to be widely employed in various industrial fields.
Source: PolyPlastics.

ALL-54102-001 $52.90

PART-NUMBER

SPOON SHIFT KNOB, DURACON [6MT]

Spoon Duracon Shift Knob is made from a special Heat-Resistant Thermo-Plastic - perfect to resist heat-soak from the transmission and exhaust and heat from direct sunlight and Summer cabin temperatures. Lightweight design at just ~80g
Includes 6MT Shift Patten Decal.
Includes Locking grub-screw and Allen wrench.
10mm  / 1.5mm

DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.
The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O) and carbon-carbon (-C-C- bond) comonomer groups are incorporated into its main chain. Therefore the copolymer has superior chemical and thermal stability, compared with acetal homopolymer. Acetal co-polymer is well-balanced in terms of mechanical, chemical and thermal properties, and its superior moldability allows it to be widely employed in various industrial fields.
Source: PolyPlastics.

ALL-54102-003 $52.90

PART-NUMBER

SPOON SHIFT KNOB, REAL TITANIUM *DISCONTINUED*

Type: S-1. 18mm  / 1.25mm Weight: 35g. Production of Hydro-Blue Mirrors uses Titanium Oxide Coating which creates a super photo-catalytic surface that reduces reflection of UV light and secondary effect of dirt and grease sticking to surface.

ALL-54102-021  $112.00

PART-NUMBER

SPOON SHIFT KNOB, REAL TITANIUM *DISCONTINUED*

Type: S-3. 10mm  / 1.5mm Weight: 35g. Production of Hydro-Blue Mirrors uses Titanium Oxide Coating which creates a super photo-catalytic surface that reduces reflection of UV light and secondary effect of dirt and grease sticking to surface.

ALL-54102-023 $112.00

PART-NUMBER

SEEKER HEAVY SHIFT KNOB 400g [5MT] EG6, EK4, EK9, FD1, DC2, DB8, GD3, GE8, GK5

Same shape and size as Honda genuine shift knob - spherical type.
It was it possible to reliably shift work as well as to achieve a very moist and shift feel from its weight. Further, in order to perform a shift operation using the weight of 400g, it is gentle to be characterized for the respective gears.
We were greatly improved wear resistance and oxidation resistance subjected to TiAlN (titanium aluminum nitride coating) process on the surface. Furthermore SEEKER logo and shift patterns (5MT) to the top part we laser etching. Distinctive color and texture with the TiAlN, and enjoy the feel of heavyweight Come.
■ stainless steel surface treatment: TiAlN (titanium aluminum nitride coating). Weight: about 400g 5MT dedicated Honda genuine nuts separately if
■ genuine knob of car not a nut fixed You will need.

SEEKER: 400g (Stainless Steel)
STOCK: ~140g (Aluminium)

SEEK-SHIFT-5MT

$120.94


PART-NUMBER

SEEKER HEAVY SHIFT KNOB 400g [6MT] EP3, DC5, FN2, FD2, AP1, AP2, ZF1

Same shape and size as Honda genuine shift knob - spherical type.
It was it possible to reliably shift work as well as to achieve a very moist and shift feel from its weight. Further, in order to perform a shift operation using the weight of 400g, it is gentle to be characterized for the respective gears.
We were greatly improved wear resistance and oxidation resistance subjected to TiAlN (titanium aluminum nitride coating) process on the surface. Furthermore SEEKER logo and shift patterns ( 6MT) to the top part we laser etching. Distinctive color and texture with the TiAlN, and enjoy the feel of heavyweight Come. ■ stainless steel surface treatment: TiAlN (titanium aluminum nitride coating). Weight: about 400g 5MT dedicated Honda genuine nuts separately if ■ genuine knob of car not a nut fixed You will need.

SEEKER: 400g (Stainless Steel)
STOCK: ~140g (Aluminium)

SEEK-SHIFT-6MT $120.94

PART-NUMBER

SEEKER SHIFT BOOT COLLAR FN2, FD2, DC5, CL7, CL9, GE8, GK5, ZF1

Machined aluminium shift boot collar for use with aftermarket gearknobs on modern Hondas.

For CR-Z · S660 of GE-FIT and GK-FIT and 1 parts of which have taken a system that connects the shift boot and genuine knob, not good appearance when combined with external shift knob. This is especially recommended for the appropriate type of vehicle so you can improve the aesthetics in that you use this shift boot color.
In addition, since we have a standard feature an O-ring on the inside of the boot color, it is easily possible to set the vertical position of the color.
It also prevents abnormal noise which is generated by the vibration of the engine.

And removing the genuine color is easy mounting of only tighten this product with the supplied tie wrap.

PART-NUMBER

SHIFT-BOOT-COL $28.39

PART-NUMBER

sEEKER SHIFT BOOT COLLAR [OEM NUT] FN2, FD2, DC5, CL7, CL9, GE8, GK5, ZF1

Machined aluminium shift boot collar for use with aftermarket gearknobs on modern Hondas.

For CR-Z · S660 of GE-FIT and GK-FIT and 1 parts of which have taken a system that connects the shift boot and genuine knob, not good appearance when combined with external shift knob. This is especially recommended for the appropriate type of vehicle so you can improve the aesthetics in that you use this shift boot color.
In addition, since we have a standard feature an O-ring on the inside of the boot color, it is easily possible to set the vertical position of the color.
It also prevents abnormal noise which is generated by the vibration of the engine.

And removing the genuine color is easy mounting of only tighten this product with the supplied tie wrap.

PART-NUMBER

SHIFT-BOOT-COL $30.37

■ STEERING WHEEL


PART-NUMBER

SPOON STEERING WHEEL [340mm]

Spoon Steering Wheel is manufactured by Momo Italy utilising an unique rim contour and 340mmm diameter specifically designed for maximum grip under race conditions - especially suited for FF vehicles with extreme 'kick-back'. Covered in the highest quality Itallian leather with Red-stitching.
Includes Spoon Horn Button (not sold separately).

ALL-78500-000 $407.52

PART-NUMBER

SEEKER RACING SPEC STEERING WHEEL [325mm]

It is Kodawari of the steering wheel in pursuit of the sport driving, including race, and the like. 
The high rigidity and a 6061 aluminum alloy 5t with excellent corrosion resistance using the base frame epidermis was arrogance luxury smooth leather. (Using a punching leather to 9 o'clock, 3 o'clock in order to improve the familiar). Grip has adopted a finger Gakari good shape a slightly thick as can be driving and disconnect the power.  Stitch of the portion of force is applied does not have a worry that leather may come off even if I use it for many years I have been put in a cross-shaped. 
In addition to place a well-balanced logo and the top mark and our slogan to several places body finished in a stylish design. 
"R-SPIRIT" horn button of the dedicated will be attached. ■ specification steering outer diameter: 325mm Frame: 6061 aluminum alloy 5t Stitch: Red color of the cross-stitch epidermis: Luxury Black smooth leather (partially use the punching leather) Embroidery: Top on the surface 6 o'clock SEEKER logo, at 12 o'clock mark, embroidery our slogan on the back 12 o'clockhorn: dedicated "R-SPIRIT" horn button included

PART-NUMBER PART-NUMBER PART-NUMBER

SEEK-S-WHEEL $460.09

■ SEATS


PART-NUMBER

SPOON CARBON BUCKET SEAT

Spoon Racing Carbon Bucket Seats are designed to hold the driver firmly into place in the perfect driving position. Ultra lightweight Carbon Fibre construction, weighing in at only 5.7Kg, this is the ultimate Racing Seat for your Honda. Designed to reduce driver-fatigue through long races.

ALL-81100-000 $1,502.09

PART-NUMBER

SPOON SEAT, RECLINER *DISCONTINUED*

Spoon Sports Seat, Recliner is an unltra-comfortable and durable seat for sports use. Features Kevlar-style fabric insert, Embroidered Spoon Logo, Adjustment Knobs on both side to accomodate LHS or RHS fitment.
Spoon Sports Seat, Recliner weighs just 12.84Kg (Recaro SR3 ~20Kg).

 

ALL-81100-010 $0.00

PART-NUMBER

SEEKER x BRIDE FULL BUCKET SEAT [FRP]

It is a full bucket seat of the collaboration model of the BRIDE boasts a high rigidity and excellent hold of. The underlying shell has adopted the VIOS3 with the most matches easily seat position as much as possible down easy structure in Japanese type (Low MAX).
Shoulder support is somewhat smallish because, wearing indoor space to narrow a S2000 is also available.
This collaboration model inherits the design of the predecessor full bucket seat that had gotten popular, adopt a skin fabric red and black two-tone specification.
The BRIDE sheet somewhat strong competition image by the headrest further subjected to a dedicated logo embroidery to add a bright red stitch performance is intact, we have succeeded in that to be transformed into optimal fashionable to street youth It was.
BRIDE-made seat back protector in this product (black) is standard equipment.
Seat rail (sold separately) is a vehicle inspection also safe because it becomes a security standard conform if you can use in combination with made BRIDE.
Please feel free to contact us so we will also sell BRIDE seat rail.

Note: If you are attached to the S2000 has a case where BOX lid portion that housed the trunk opening and closing the switch can not be to interfere with the fully open to the sheet. In each case there is no problem if it is possible to slide the seat forward.

■ Specifications
Shell: FRP Silver Shell (VIOS3-based)
Skin fabric: Black & Red logo dedicated logo and dedicated Red stitch Add
Sheet weight about 7.1kg (not including the seat rails)

SEEK-BRID-FRP $1,248.82

PART-NUMBER

SEEKER SEATBELT WARNING CANCELER [ALUMINIUM]

Eliminates seatbelt warning light when using harness at the circuit / motorsport. Simply plug in to your stock seatbelt plug while you are not using the standard sash-belts.

PART-NUMBER

SEEK-BELT-ALU $33.55

■ STICKERS / DECALS


PART-NUMBER

SPOON WINDSHIELD BANNER

Spoon Windshield Banner is a functional and stylish upgrade. For fitment of Roll-Cage, the Sun-Visors must be removed for cage-clearance. The Spoon Banner replaces the function of the Window visors and can be trimmed to suit individual vehicle or personal requirments. Also weight saving through removal of window visors is a benefit.
Width: 185 x Height: 1450mm.

INSTALLATION TIPS:
- Wash car normally.
- Clean windscreen with Wax/Grease Remover.
- ISO Alcohol Wipe. - mix 1 droplet detergent with 2/3 Water 1/3 methylated spirits into Spray squirter.
- Squirt glass under banner. - Position Banner.
- Squeegee Water and Bubbles out.
- Trim edges with blade.
- Leave to dry in sun 1 Hour.

ALL-90000-000 $63.13

PART-NUMBER

SPOON REAR WINDOW STICKER, BLACK [800mm]

Spoon Rear Window Sticker as used on the Spoon Race and Demo Cars since ~1987.

 

ALL-90000-B02 $37.88

PART-NUMBER

SPOON REAR WINDOW STICKER, WHITE [800mm]

Spoon Rear Window Sticker as used on the Spoon Race and Demo Cars since ~1987.

 

ALL-90000-W02 $37.88

PART-NUMBER

SPOON DOOR STICKER, BLACK [300mm]

Spoon 300mm Sticker for use on door, under the mirror.

 

ALL-90000-B01 $18.94

PART-NUMBER

SPOON DOOR STICKER, WHITE [300mm]

Spoon 300mm Sticker for use on door, under the mirror.

 

ALL-90000-W01 $18.94

PART-NUMBER

SPOON TEAM STICKER, BLACK [200/100mm]

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.

 

ALL-90000-B00 $17.42

PART-NUMBER

SPOON TEAM STICKER, WHITE [200/100mm]

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.

 

ALL-90000-W00 $17.42

PART-NUMBER

SPOON-SPORTS STICKER [BLACK] *NEW*

New School Spoon Sports Logo Sticker - us used on doors of modern Honda vehicles such as Fit GK5, CRZ, S660 etc.
H40mm x W250mm.

 

ALL-90000-B21 $18.94

PART-NUMBER

SPOON-SPORTS STICKER [WHITE] *NEW*

Spoon 200mm Sticker for exterior use (Tail Gate etc).
Includes bonus 100mm Sticker perfect for use on Helmets, ECU Cover etc.
H40mm x W250mm.

 

ALL-90000-W21 $18.94

PART-NUMBER

SPOON MARK STICKER SET [TSURU]

Spoon Mark Sticker Set - featuring the famous Spoon 'Tsuru' logo, based on the famous 'Spoon Curve' at Suzuka Circuit.
Each set icludes:
2 x Large Stickers - for use on Rear Bumper above Exhaust Tip.
3 x Medium Stickers - for use on Doors.
3 x Small Stickers - perfect for use on Helmets etc.

ALL-90000-T10 $20.90

PART-NUMBER

TYPE ONE MARK STICKER

Type One Mark Sticker - as used on Spoon Carbon Spoiler and other places.

 

 

ALL-90000-T01 $8.71

PART-NUMBER

TYPEONE LOGO STICKER *NEW*

New School Type One Sticker, die-cut vinyl style for use on Door etc.

 

 

ALL-90000-T21 $18.29

PART-NUMBER

SPOON CARBON RACING MIRROR [NO BASE PLATE] *NEW*

Spoon Carbon Racing Mirrors were launched over 20 years ago, now re-released using the original moulds and design. Using the same famous aerodynamic shape, the mirrors are extremely tough and also lightweight. Now incorporating new Electric Mirror Adjustment and Spoon Hydro Blue Mirrors with 1000R curature for maximum vision. Also Features Printed Spoon-Sports Logo to identify the genuine product from counterfeit products.
No Base Plate, for use on different vehicles or using existing Base Plates.

ALL-76210-000 $0.00

PART-NUMBER

SPOON UNIVERSAL CARBON FIBRE RACING MIRROR *DISCONTINUED*

 

 

76200-KCR-010 $522.47

PART-NUMBER

TEAM SEEKER METAL STICKER [PLAQUE]

It is the official sticker of SEEKER.
It will be the specification feeling of luxury that has put the color in anodized aluminum metal plate.
Exterior is possible of course also attached easily into the interior of the dashboard and the like.
This sticker is the hope in the opportunity to make more of the communication field.

Plaque Style, Size: 100x36mm

SEEK-TEAM-PLAQ

$17.04


PART-NUMBER

SEEKER EMBLEM [BADGE]

Chrome Badge perfect for use on Bootlid / Tailgate or Dashboard.
SEEKER logo is a three-dimensional design and emblem which has been subjected to luxurious black chrome plating process. Black chrome has presence is rich in expression and or black out or shining dazzlingly by the angle at which the light hits. *Bright Chrome no longer available.
160mm x 18mm

PART-NUMBER PART-NUMBER

SEEK-EMBLEM $62.44

PART-NUMBER

SEEKER LOGO STICKER [S] 150mm

150mm Sticker. WHT/SILV/BLK

 

 

SEEK-LOGO-S $17.04

PART-NUMBER

SEEKER LOGO STICKER [M] 300mm

300mm Door Sticker (Black).

 

 

SEEK-LOGO-M $28.39

PART-NUMBER

SEEKER LOGO STICKER [L] 800mm

800mm Rear Window Sticker (White).

 

 

SEEK-LOGO-L $68.15

PART-NUMBER

SEEKER HELMET VISOR STICKER

It is a competition style sticker pasted on the visor of the helmet. Front view of the part that is a sticker pasted on to be printed on the punching material of the sticker also we have secured.
You can use to cut according to the visor shape.
Width: ~435mm

PART-NUMBER PART-NUMBER

SEEK-VISOR $65.22

■ ENGINE ACCESSORIES


PART-NUMBER

spoon RACING PLUG # 24 [EACH]

Spoon Racing Plugs specifically selected for use in Honda engines for performance applications (also suitable for Street use). Superior spark and re-cooling ability - NGK8 equivalent.

98079-16B-G24 $34.83

PART-NUMBER

spoon RACING PLUG # 24 [4PCE]

Spoon Racing Plugs specifically selected for use in Honda engines for performance applications (also suitable for Street use). Superior spark and re-cooling ability - NGK8 equivalent.
Set of 4 Plugs in special Spoon packaging.

98079-16B-G24-X4 $146.29

PART-NUMBER

spoon OIL FILLER CAP

Extreme heat and engine vibration in Race Car can cause the OEM Plastic Cap to shake loose or even crack. Spoon Oil Filler Cap made from High-Grade Aluminium, Expands at the same rate as your (Aluminium) Valve Cover, also has special rubber seal designed to reduce vibration transfer and hold cap in place.

ALL-15610-000 $73.58

PART-NUMBER

seeker ULTRA-LIGHT OIL FILLER CAP [RED]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight about 60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.

PART-NUMBER

OIL-CAP-RED $89.39

PART-NUMBER

seeker ULTRA-LIGHT OIL FILLER CAP [BLACK]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight about 60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.

PART-NUMBER

OIL-CAP-BLK $89.39

PART-NUMBER

seeker ULTRA-LIGHT OIL FILLER CAP [GOLD]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight about 60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.

PART-NUMBER

OIL-CAP-GLD $89.39

PART-NUMBER

seeker ULTRA-LIGHT OIL FILLER CAP [BLUE]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight about 60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.

PART-NUMBER

OIL-CAP-BLU $89.39

PART-NUMBER

seeker ULTRA-LIGHT OIL FILLER CAP [SILVER]

The aluminum oil filler cap is subjected to a lightening to the limit while sufficient strength has been achieved ultra-lightweight (individual weight about 60g). In addition, since we have adopted a good shape of Gakari finger is very easy to open and close the cap. One part of the vehicle such as FD2 you might shaft if fitted with a front tower bar outside is a difficult opening and closing of many filler cap those of layout through the just above the filler cap, but a round bar or the like to the filler cap lightening hole It can be relatively easily opened and closed by plug. Functional design that was obtained as a result of pursuing such utility is ideal for dress-up of the engine room.

PART-NUMBER

OIL-CAP-SIL $89.39

PART-NUMBER

spoon MAGNETIC DRAIN BOLT, ENGINE

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Engine Drain Bolt sold individually.

ALL-90009-001 $21.16

PART-NUMBER

spoon MAGNETIC DRAIN BOLT, TRANSMISSION

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Transmission Drain Bolt sold individually.

ALL-90009-002 $21.16

PART-NUMBER

spoon MAGNETIC DRAIN BOLT SET

Microscopic metal fragments from the shearing of gears and wear of bearings etc. are collected by Spoon's high-power magnets.
Effectiveness of the product is immediately apparent after each oil change.
Set of Engine and Transmission Drain Bolts.

ALL-90009-000 $39.97

PART-NUMBER

SPOON RESERVOIR TANK COVER SET [SOX] *NEW*

The last thing you want to do at the circuit is lose traction thanks to someone having dropped fluids on to the track surface, let alone drop your own fluids and contribute to the problem - Spoon Reservoir Covers slide over your Brake Fluid Reservoir and Clutch Fluid Reservoir (etc.) and are designed to catch any fluids that may be spilled under high lateral-G driving at the circuit. Also helps prevent damage to engine-bay paintwork from spillage of Fluids.
25% Cotton 75% Polyester. 1PCE.

ORG-90000-020 $13.33

PART-NUMBER

SPOON RESERVOIR TANK COVER SET [SOX] *DISCONTINUED*

50% Cotton 50% Polyester. 2PCE.
Discontinued November 2016.

ORG-90000-001 $13.93

PART-NUMBER

SEEKER RESERVOIR TANK COVER SET [SOX]

Fire Retardant Material. It is a safe reservoir tank cover that was manufactured in the flame-retardant material. Brake and clutch, and by using covered the reservoir tank of power steering fluid, to keep the quickly absorbed engine room boiling over of fluid to clean. The color is also the identity of the SEEKER "SEEKER orange".

PART-NUMBER

SEEK-RES-COV $16.83

PART-NUMBER

SPOON BOLT, TITANIUM [M6] *DISCONTINUED*

Spoon uses the Titanium Bolts wherever possible in an effort to reduce weight through any means possible.
M6 Thread.

 

BTI-06016-000 $0.00

■ COOLING SYSTEM


PART-NUMBER

SPOON RADIATOR CAP [TYPE-D] EG6, EG9, EG2, EK4, EK9, DC2, DB8

To raise the pressure of the cooling system raises the boiling point of the coolant. Spoon Radiator Caps raise the pressure to increase the efficiency of the cooling system. For the Complete Spoon Cooling System, we recomend using the Radiator Cap in combination withthe Spoon Thermo Switch, Spoon Thermostat and Spoon SEP Radiator Hoses. Please check with us for the correct type of Cap for use on your Vehicle - Type-D Caps suit newer Honda Radiators such as EG6/EG9/EG2/EK4/EK9/DC2/AP1/CL9 etc. Not suitable for use on Aftermarket radiators (please use Type-F).
SPOON: 1.35kgf/cm2
HONDA: 1.1kgf/cm2

PART-NUMBER

ALL-19045-000 $30.56

PART-NUMBER

SPOON RADIATOR CAP [TYPE-F] DA9, EF9, AFTERMARKET RADIATORS

To raise the pressure of the cooling system raises the boiling point of the coolant. Spoon Radiator Caps raise the pressure to increase the efficiency of the cooling system. For the Complete Spoon Cooling System, we recomend using the Radiator Cap in combination withthe Spoon Thermo Switch, Spoon Thermostat and Spoon SEP Radiator Hoses. Please check with us for the correct type of Cap for use on your Vehicle - Type-F Caps suit older Honda Radiators such as EF9/EF8/DA9 etc. Also suitable for use on most aftermarket radiators such as Spoon, Koyo, Mishimoto etc.
SPOON: 1.35kgf/cm2
HONDA: 1.1kgf/cm2

PART-NUMBER

ALL-19045-001 $30.56

PART-NUMBER

SEEKER RADIATOR CAP [TYPE-D]

It is a high-pressure radiator cap to increase the pulling cooling efficiency boiling point of the coolant by increasing the pressure in the radiator.
This is quite useful at the time of high rotation traveling.
※ opening temperature: 1.3kgf / cm2 (normal 1.1)
1.3Kgf/cm2

PART-NUMBER

SEEK-RAD-TYPD $35.49

PART-NUMBER

SEEKER RADIATOR CAP [TYPE-F]

It is a high-pressure radiator cap to increase the pulling cooling efficiency boiling point of the coolant by increasing the pressure in the radiator.
This is quite useful at the time of high rotation traveling.
※ opening temperature: 1.3kgf / cm2 (normal 1.1)
1.3Kgf/cm2

PART-NUMBER

SEEK-RAD-TYPF $35.49

PART-NUMBER

SPOON RADIATOR STAY [WHITE] EK4, EK9, DC2, DB8, AP1, AP2

Spoon Radiator Stays were used on the Race Cars in an effort to reduce weight in all ways possibel. The Machined Alloy Stays are substantially lighter than the sstock steel stays. Due to popular demans, Spon released their Radiator Stays for sale to the public.
SPOON: 12g
STOCK: 52g

ALL-74171-000 $21.77

PART-NUMBER

SPOON RADIATOR STAY [BLACK] EK4, EK9, DC2, DB8, AP1, AP2

Spoon Radiator Stays were used on the Race Cars in an effort to reduce weight in all ways possibel. The Machined Alloy Stays are substantially lighter than the sstock steel stays. Due to popular demans, Spon released their Radiator Stays for sale to the public.
SPOON: 12g
STOCK: 52g

ALL-74171-001 $21.77

PART-NUMBER

SPOON HEAT BARRIER TAPE

Oil Viscosity decreases when subjected to constant high temperatures during performance driving. The Exhaust Manifold on B-series engines routes beneath the Oil Pan in very close proximity – this can lead to extreme heat transfer from the exhaust manifold. This is evident when you remove an old Oil Pan and inspect the shallow end of the pan where the exhaust manifold is closest – you will see baked on oil residue on the inside of the pan and this is clear evidence of high heat transfer from the exhaust. Spoon Heat Barrier Tape provides a thermal barrier in between the Exhaust Manifold and the Oil Pan. We recommend application of the Heat Barrier Tape to new Spoon Baffled Oil Pans as the fresh clean surface will provide excellent adhesion when the Oil Pan is new – plus installation Is very easy when the Oil Pan is off the engine. The Heat Barrier Tape can be used on other models and components where you would want to prevent heat transfer from various components into the fluid systems etc. For example Master Brake Cylinder (and Lines), Master Clutch Cylinder (and Lines) Brake Lines, S2000 Heat Shield… In fact, the Spoon S2000 Super Taikyu Race Car uses the heat shield over the entire Firewall through to the whole length of the Transmission Tunnel etc.
Size: 200mm x 300mm 

ALL-11200-000 $22.64

PART-NUMBER

SPOON COOL COOLANT *DISCONTINUED*

117 ℃ freezing temperature:: -45 ℃ boiling point data 70% when coolant. Weak point of the high-performance high-rotary engine was ensuring lubrication and cooling. Defoaming and high heat exchange rate is determined temperature is varied rapidly in a complex water flow passage block, in the head, anti-corrosion protection of aluminum block water jacket Honda engine-specific is also important cooling. It was developed as part of a cooling test, the effect where it is used at the 24-hour endurance race on the basis of ethylene glycol to exert a cooling effect in high temperature areas such as Africa and southwest Asia.

ALL-08C01-000 $41.36

SUSPENSION SYSTEM
■ SUSPENSION SYSTEM etc. Top of Page

■ LONG HUB BOLTS


PART-NUMBER

SPOON LONG HUB BOLT [EACH]

 

The standard Hub Bolts will only allow for use of a 5mm spacer maximum. Spoon Long Hub Bolts are +8mm longer than standard hub bolts to allow use of Wheel Spacers without compromise of the length of the thread the Wheel Nut has to bite. Recommended for use when installing Spoon Brake Calipers to enable use of Wheel Spacers to promote Caliper to Spoke clearance of Wheels.
Hub Bolt, Each.
SPOON: 52mm
HONDA: 44mm

90113-EK9-000 $8.71

PART-NUMBER

SPOON LONG HUB BOLT [SET, 20]

The standard Hub Bolts will only allow for use of a 5mm spacer maximum. Spoon Long Hub Bolts are +8mm longer than standard hub bolts to allow use of Wheel Spacers without compromise of the length of the thread the Wheel Nut has to bite. Recommended for use when installing Spoon Brake Calipers to enable use of Wheel Spacers to promote Caliper to Spoke clearance of Wheels.
Hub Bolt, Set of 20.
SPOON: 52mm
HONDA: 44mm

90113-EK9-000 $174.16

■ LIGHTWEIGHT WHEEL NUT


PART-NUMBER

SPOON WHEEL NUT [BLUE]

M12 x 1.5 pitch - perfect for Honda.
60° Taper.
SPOON: 21.13g
HONDA: 31.65g

ALL-90304-000 $6.53

PART-NUMBER

SPOON WHEEL NUT [RED]

M12 x 1.5 pitch - perfect for Honda.
60° Taper.
SPOON: 21.13g
HONDA: 31.65g

ALL-90304-001 $6.53

PART-NUMBER

SPOON WHEEL NUT [GREY] *DISCONTINUED*

M12 x 1.5 pitch - perfect for Honda.
60° Taper.
SPOON: 21.13g
HONDA: 31.65g.

ALL-90304-002 $6.53

PART-NUMBER

SPOON WHEEL NUT [SET OF 16]

M12 x 1.5 pitch - perfect for Honda.
Set of 16.
60° Taper.
SPOON: 21.13g
HONDA: 31.65g

$104.49

PART-NUMBER

SPOON WHEEL NUT [SET OF 20]

M12 x 1.5 pitch - perfect for Honda.
Set of 20.
60° Taper.
SPOON: 21.13g
HONDA: 31.65g

ALL-90304-000 $130.62

■ STRAIGHT SPRING


PART-NUMBER

SPOON STRAIGHT SPRING, FULL SPEC 10KG/mm *DISCONTINUED*

Spoon Straight Springs (Fixed-Rate) are for use with Spoon Full Spec Dampers for Motorsport use where customised spring rates are required for certain circuits or vehicle setups.
65mm (diameter) x 178mm (length)
PER SPRING (1PCE)
10Kg/mm

51400-65-10K $102.86

PART-NUMBER

SPOON STRAIGHT SPRING, FULL SPEC 12KG/mm

Spoon Straight Springs (Fixed-Rate) are for use with Spoon Full Spec Dampers for Motorsport use where customised spring rates are required for certain circuits or vehicle setups.
65mm (diameter) x 178mm (length)
PER SPRING (1PCE)
12Kg/mm

51400-65-12K $97.96

PART-NUMBER

SPOON STRAIGHT SPRING, FULL SPEC 14KG/mm

Spoon Straight Springs (Fixed-Rate) are for use with Spoon Full Spec Dampers for Motorsport use where customised spring rates are required for certain circuits or vehicle setups.
65mm (diameter) x 178mm (length)
PER SPRING (1PCE)
14Kg/mm

51400-65-14K $97.96

PART-NUMBER

SPOON STRAIGHT SPRING, FULL SPEC 18KG/mm

Spoon Straight Springs (Fixed-Rate) are for use with Spoon Full Spec Dampers for Motorsport use where customised spring rates are required for certain circuits or vehicle setups.
65mm (diameter) x 178mm (length)
PER SPRING (1PCE)
18Kg/mm

51400-65-18K $97.96

PART-NUMBER

SPOON STRAIGHT SPRING, FULL SPEC 20KG/mm

Spoon Straight Springs (Fixed-Rate) are for use with Spoon Full Spec Dampers for Motorsport use where customised spring rates are required for certain circuits or vehicle setups.
65mm (diameter) x 178mm (length)
PER SPRING (1PCE)
20Kg/mm

51400-65-20K $97.96

PART-NUMBER

SPOON ADJ. C-SPANNER

C-Spanner adjustment wrench for Spoon Full spec Dampers - May work with other brands also.

 

SPP-51600-001 $51.43

■ WHEELS Top of Page

PART-NUMBER

CR93 17-7.0J +52 4x100 [BLUE] EG6, EK4, GD3, GE8, GK5

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-7.0J +52 4H100
SPOON BLUE

42700-770-52B  $304.77

PART-NUMBER

CR93 17-7.0J +52 4x100 [SILVER] EG6, EK4, GD3, GE8, GK5

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-7.0J +52 4H100
SILVER

42700-770-52S $304.77

PART-NUMBER

CR93 17-7.0J +52 4x100 [YELLOW] EG6, EK4, GD3, GE8, GK5

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-7.0J +52 4H100
SPOON YELLOW

42700-770-52Y $304.77

PART-NUMBER

CR93 17-7.0J +45 5x114.3 [BLUE] EK9, DC2, EP3, DC5

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17 "7.0J +45 5H114.3
SPOON BLUE

42700-770-45B  $304.77

PART-NUMBER

CR93 17-7.0J +45 5x114.3 [SILVER] EK9, DC2, EP3, DC5

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17 "7.0J +45 5H114.3
SILVER

42700-770-45S $304.77

PART-NUMBER

CR93 17-7.0J +45 5x114.3 [YELLOW] EK9, DC2, EP3, DC5

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17 "7.0J +45 5H114.3
SPOON YELLOW

42700-770-45Y $304.77

PART-NUMBER

CR93 17-8.5J +53 5H114.3 [BLUE] AP1, AP2, FN2, FD2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-8.5J +53 5H114.3
SPOON BLUE

42700-785-53B  $315.66

PART-NUMBER

CR93 17-8.5J +53 5H114.3 [SILVER] AP1, AP2, FN2, FD2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-8.5J +53 5H114.3
SILVER

42700-785-53S $315.66

PART-NUMBER

CR93 17-8.5J +53 5H114.3 [YELLOW] AP1, AP2, FN2, FD2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-8.5J +53 5H114.3
SPOON YELLOW

42700-785-53Y $315.66

PART-NUMBER

CR93 17-9.5J +63 5H114.3 [BLUE] AP1, AP2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-9.5J +63 5H114.3
SPOON BLUE

42700-795-63B $315.66

PART-NUMBER

CR93 17-9.5J +63 5H114.3 [SILVER] AP1, AP2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-9.5J +63 5H114.3
SILVER

42700-795-63S $315.66

PART-NUMBER

CR93 17-9.5J +63 5H114.3 [YELLOW] AP1, AP2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-9.5J +63 5H114.3
SPOON YELLOW

42700-795-63Y $315.66

PART-NUMBER

CR93 17-7.0J +52 5H114.3 [BLUE] AP1, AP2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-7.0J +52 5H114.3
SPOON BLUE

42701-770-52B  $304.77

PART-NUMBER

CR93 17-7.0J +52 5H114.3 [SILVER] AP1, AP2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-7.0J +52 5H114.3
SILVER

42701-770-52S $304.77

PART-NUMBER

CR93 17-7.0J +52 5H114.3 [YELLOW] AP1, AP2

Spoon CR93 wheels are ultra-strong and lightweight wheels designed specifically for popular modern Honda vehicle offsets (EK, EP3, DC5, FN2, FD2, AP1, AP2, GE8, GK5, ZF1). Designed to clear Spoon Monocoque Calipers. Available in Spoon Blue, Spoon Yelow or Silver finish, the signature wheels are used on most modern Spoon Demo Cars. Stylish 16-spoke design promotes airflow for brake-cooling and ventillation. Includes Spoon Centre Caps (not sold separately).
17-7.0J +52 5H114.3
SPOON YELLOW

42701-770-52Y $304.77

PART-NUMBER

SW 388 [15/6.5 35 4x100] *DISCONTINUED* EG6, EK4, GD3, GE8

15" 6.5J +35 4H100 Alumite Black.

 

42700-AW1-000 $0.00

PART-NUMBER

SW 388 [15/6.5 45 4x100] *DISCONTINUED* EG6, EK4, GD3, GE8

15" 6.5J +45 4H100 Alumite Black.

 

42700-AW1-001 $0.00

PART-NUMBER

SW 388 [15/6.5 45 4x114] *DISCONTINUED* DC2 ~96, DB8 ~96

15" 6.5J +45 4H114.3 Alumite Black.

 

42700-AW1-002 $0.00

PART-NUMBER

SW 388 [15/6.5 42 5x114] *DISCONTINUED* DC2 ~99, EK9, EP3, DC5

15" 6.5J +42 5H114.3 Alumite Black.

 

42700-AW1-004 $0.00

PART-NUMBER

SW 388 [16/7.0 45 4x100] *DISCONTINUED* DC2 ~99, EK9, EP3, DC5, AP1

16" 7.0J +45 4H100 Alumite Black.

 

42700-AW1-005 $0.00

PART-NUMBER

SW 388 [16/7.0 45 5x114] *DISCONTINUED* DC2 ~99, EK9, EP3, DC5, AP1

16" 7.0J +45 5H114.3 Alumite Black.

 

42700-AW1-007 $0.00

PART-NUMBER

RAYS CE28 SL [SEEKER EDITION] *COMING SOON*

18x8.5" 5x114 +52 OFFSET.


 

SEEK-CE28-SL TBA

PART-NUMBER

WIDE TREAD SPACER [5mm] EK9, EP3, FN2, FD2, DC2, DC5, AP1, AP2, ZF1

5mm Spacer 2PCE. 4x114 / 5x114. Aluminum is a die-cast of 5mm thickness wide tread spacer.
It was to minimize the camera shake by setting a high degree of accuracy and high strength and Honda vehicles only size the hub diameter (except one part of the model).
It will be the hub diameter 64m P.C.D 114.3 4 hole / 5 hole multi-type two 1SET.

SEEK-SPACER-5MM $50.32

CALIPER-REBUILD PARTS
■ CALIPER REBUILD KITS Top of Page

■ Please clickHERE to view individual components


PART-NUMBER

Monocoque Caliper Retainer

Set of 4 Clips (for 2 Calipers) for rebuilding Monocoque Calipers.

 

SPP-45020-M10 $50.64

■ MERCHANDISE Top of Page

PART-NUMBER

SPOON SKATEBOARD DECK [GO-TUNING]

Spoon-themed kateboard Deck, By Go-Tuning USA

 

ALL-SK8-GO TBA

PART-NUMBER

SPOON EG6 1:43 [YELLOW] *LIMITED STOCK AVAILABLE*

1:43 Model Car - Replica of Spoon EG6 Street Version (Yellow).


ORG-90001-Y00 $123.25

PART-NUMBER

SPOON EG6 1:43 [WHITE] *LIMITED STOCK AVAILABLE*

1:43 Model Car - Replica of Spoon EG6 Street Version (White).

 

ORG-90001-W00 $123.25

PART-NUMBER

SPOON EK9 1:43 [YELLOW] *NEW*

1:43 Model Car - Replica of Spoon EK9 Street Version (Yellow).

 

ORG-90002-Y00 $123.25

PART-NUMBER

SPOON EK9 1:43 [WHITE]

1:43 Model Car - Replica of Spoon EK9 Street Version (White).

 

ORG-90002-W00 $123.25

PART-NUMBER

SPOON EG6 1:43 MODEL KIT[GROUP-A] *NEW*

1:24 Model Kit LIMITED EDITION by Hasegawa of the legendary #95 Spoon EGs Group-A Touring Car.
Spoon Official Licensed Merchandise.
Assembly required - Recommended for ages 10 and older.

 

ORG-91001-000

TBA


PART-NUMBER

SPOON UMBRELLA [GO-TUNING] *COMING SOON*

Spoon Sports Golf Umbrella. Features auto opening mechanism and a carbon shaft. Includes carrying sleeve.
Spoon Sports USA Official Merchandise.

52 inch diameter
40 inch tall
6 inch foam pad grip
Light weight durable carbon shaft
Spring loaded open
Easy Close
Sleeve with carrying strap

ALL-UMB-GO TBA

PART-NUMBER

SEEKER OFFICIAL T-SHIRT 2016 [SMALL]

Team Seeker Official T-Shirt 2016 Version. Features Logo on Front and #75 Racing Number on the back.
PLEASE NOTE: Sizing is Japanese which is smaller than Western - normally go for the next size up.

PART-NUMBER PART-NUMBER

 

$41.64


PART-NUMBER

SEEKER OFFICIAL T-SHIRT 2016 [MEDIUM]

Team Seeker Official T-Shirt 2016 Version. Features Logo on Front and #75 Racing Number on the back.
PLEASE NOTE: Sizing is Japanese which is smaller than Western - normally go for the next size up.

PART-NUMBER PART-NUMBER

  $41.64

PART-NUMBER

SEEKER OFFICIAL T-SHIRT 2016 [LARGE]

Team Seeker Official T-Shirt 2016 Version. Features Logo on Front and #75 Racing Number on the back.
PLEASE NOTE: Sizing is Japanese which is smaller than Western - normally go for the next size up.

PART-NUMBER PART-NUMBER

  $41.64

PART-NUMBER

SEEKER OFFICIAL T-SHIRT 2016 [EXTRA-LARGE]

Team Seeker Official T-Shirt 2016 Version. Features Logo on Front and #75 Racing Number on the back.
PLEASE NOTE: Sizing is Japanese which is smaller than Western - normally go for the next size up.

PART-NUMBER PART-NUMBER

  $41.64

PART-NUMBER

SEEKER KEYRING [CARBON]

Original key chain of realistic made of carbon (CFRP). I gave a color put manually digging the logo text part machining to plate-like CFRP. Very to prevent the peeling of the colored portion of the long-term use along with the cost, but it is such an approach will finish with a sense of depth that can not be reproduced by only print. The size of the plate portion is a vertical width 29mm · width 75mm. Image key ring will be attached.

* Color purse is subject to individual differences in the density and the like of the color and color because it is done by hand. Please note.

* Plate portion and a key ring of this product has been packaged without connection.
Please use through the key ring to the triangular hole in the plate after your purchase.

  $48.27
 

 
 

■ Prices listed are in AUD - Gaijin-Garage can only accept payment in the form of AUD (Australia Dollars).
■ Item pricing correct as at August 1st, 2016 (nominal exchange rate of 78.00JPY/1AUD). Prices listed are subject to change without notice. Gaijin-Garage aims to bring you the Spoon Sports and Seeker product ranges at the best possible prices however, increases of the cost of business, fluctuations in exchange rates, changes to shipping and manufacturing costs, taxes and duties applied (and other factors beyond our control) may result in price changes. When possible, Gaijin-Garage will try to absorb these costs and attempt to avoid passing them on to the Customer. Gaijin-Garage will inform the Customer of any change in price prior to finalising any orders or shipment.
■ Items that have been hand-delivered or picked up by the Customer are still subject to shipping charges and relevant taxes.
■ International Orders are exempt from GST (Australian sales tax) however any taxes or duties incurred at the Cutomer's destination country are the responsibility of the Customer. Goods received into Australia may be subject to taxes and duty on entry to Australia - these fees may apply to international orders however sales-tax on the purchase itself is exempt.
■ Gaijin-Garage are not responsible for any typographical errors in product pricing or technical specifications (etc.) listed on this website or on any other material.
■ Product descriptions have been translated from Japanese, some descriptions may be a direct software translation - please contact us for any clarification.
■ Discontinued parts listed for reference purposes only - These parts are no longer in production and therefore not available for purchase.
■ PLEASE READ OUR TERMS AND CONDITIONS FOR MORE INFORMATION.

 
#95 Spoon Race Car News
Click Here to return to the Gaijin-Garage Homepage  
   
■ Spoon-Sports
■ Seeker
■ Rigid Collar™
■ Honda Genuine
■ Modulo / Access
■ Email sales@gaijin-garage.com
■ Phone +61 422 519 108
■ Facebook
■ Instagram
■ Youtube
 
© Gaijin-Garage 2016. Disclaimer | FAQ | Top of Page
PayPal - Verified Trader
リジカラ RIGID COLLAR Australia